A friend has a Husky 142 which he likes very much but the bar is not oiling enough. Is there an adjustment for this? Thanks.
Husqvarna 142 oiler
- Thread starter homestead
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Jack33
New Member
Nope...first check the holes in the bar and clean the groove out. Then try running without the bar, chain, and cover on it and see if it is pumping oil. If not, the line is pluged or the pump is bad. Or it is to cold for the oil you are running but doesn't take to long to warm it up with a hot saw.
http://weborder.husqvarna.com/order_static/doc/HOEN/HOEN2005/HOEN2005_5301661-32.pdf
http://weborder.husqvarna.com/order_static/doc/HOEN/HOEN2005/HOEN2005_5301661-32.pdf
Thank you jack33! I shall tell my pal; No adjustment? I run larger saws so do not know if these small ones have adjustments!
hgomestead!
hgomestead!
The parts to completely replace the oil pump on that saw should be well under 10 dollars. Mostly plastic, ain't it wonderful?
- Status
