Jotul #1 Combifire stove

[underbitte]

Please help! I've got an unused Jotul #1 Combifire stove but do not have any instillation instructions! Does anyone know what the clearances are for this stove? Any other information about these stoves would be greatly appreciated.

 

[Gunks]

We used a Jotual Combifire #1 for 7 years. It came with the house. We just replaced it with a new stove this season.. This picture shows how it was installed. I don't know the specs for installing it but the stove body is hot on all sides so it should have good clearance from the walls.

 

[begreen]

Hey Gunks, can you add your spiffy Scan 60 to your signature?

Underbitte, welcome. That is quite a find, it's a serious heater. You should be able to find a UL clearance plate on the rear of the stove. The stove needs a lot of room. You can reduce the clearances by wall shields, the best being by installing an NFPA 211 ventilated wall shield and using either pipe shields or double-wall connector pipe.

If you can get a sharper shot of this UL label from your stove, could you post it here for others to find?

 

[jruttle3]

Underbitte, You can get a schematic of your stove ( plus replacement parts) at www.woodmanspartsplus.com.

And Gunks, How do you deal with that hot handle with just the bare steel exposed?

 

[begreen]

http://www.rutland.com/productinfo/black-furnace-cement.html