liner brushing w/Quad 5100i

[40plymouth]

Got a new Quad 5100i last fall, really enjoying it. Want to run a brush before I start burning this season, and just curious if the available cleaning brush kit rods are flexible enough to allow running the brush from within the stove after removing the baffle. Installed with 6 inch insulated liner. Thanks, not fond of heights.

 

[JA600L]

Look into a soot eater.

 

[velvetfoot]

I use this to clean my inserts from below:
https://www.northlineexpress.com/rutland-3-4-x-3-proflex-rod-tlc-4883.html

 

[40plymouth]

Thanks, will check these out. Much appreciated.

 

[velvetfoot]

You might have to take out a tube, for the brush or maybe the baffle . I had to on my Quad 2700i. On my Hamton, not necessary for the baffle removal or getting the brush into the pipe.