Need help locating ceramic exhaust temp sensor

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
C

chamas

Member
Dec 13, 2011
162
PNW
Hi,

Enviro EF2i needs ceramic exhaust temp sensor, the current one is balky and does not close until the exhaust housing gets up to 170 - 180*F

I believe the close temp should be 120*.

I have seen them for $50 - $60 online but would like to avoid paying the 400% (or more) markup for a $10 part.

Can anyone share a tip on locating a reasonable priced ceramic 120* N/O snapdisc?

Thanks!

EF-010_photo1.JPG
 
Status
Not open for further replies.

Similar threads

E
Strong Draft and Flue Temps
Replies
11
Views
645
Travis Industries: Lopi, Avalon, FPX
EbS-P
EbS-P
H
Country Canyon ST310 - should we replace it?
Replies
19
Views
1K
IHP: Astria, Ironstrike, Country
hailingsummer
H
SamuelL
Need some help with a Vansco (Treemont?) TAC 520 insert stove
Replies
2
Views
2K
Classic Wood Stove Forums (prior to approx. 1993)
SamuelL
SamuelL
DoubleB
  • Sticky
Tundra/Heatmax Information Guide
Replies
15
Views
17K
The Boiler Room - Wood Boilers and Furnaces
ezequias
E
webfish
  • Locked
Central Furnaces,Boilers and OWB USING STORAGE TANKS WITH BIOMASS BOILER SYSTEMS.
Replies
0
Views
3K
Articles
webfish
webfish
Top Bottom
Back