i am getting a enviro omega installed first week of jan. We are going to install it in the corner but we have 2 options. We want the extended pipe so that the smoke wont blow into the house if anything happened. I need some pics so that I can see a install with the pipe on the inside up 5 feet then out and a install with the pipe going straight out then the pipe going up on the outside.
Need pics of a corner pellet stove install
- Thread starter deadeye316
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
webbie
Seasoned Moderator
Mine might be something like that:
https://www.hearth.com/econtent/index.php/wiki/Install_a_Pellet_Stove/
Works very well
https://www.hearth.com/econtent/index.php/wiki/Install_a_Pellet_Stove/
Works very well
how long of a pipe do i need so that it doesnt blow into the house. One place said 3 feet and the other 5 feet.
webbie
Seasoned Moderator
No set amount - in fact most pellet stoves do not specify a "rise" at all.
But, the more the merrier would be by view....I would go with 5 if possible. Mine has that or more.
But, the more the merrier would be by view....I would go with 5 if possible. Mine has that or more.
hearthtools
Moderator Emeritus
If you can I would go out the wall and up
Much cleaner inside look and gets the stove closer to the wall.
Ok I have had 5 different stoves in this location so the hole is larger and I used sheetmetal to cover the large hole
but here is the picks of my Omega that my almost 3 year old install for me.
http://www.hearthtools.com/pellet/enviro/IMG_7946omega.jpg
http://www.hearthtools.com/pellet/enviro/IMG_7951omega.jpg
http://www.hearthtools.com/pellet/enviro/omegacornerpipe.jpg
http://www.hearthtools.com/pellet/enviro/omegacornerpipeside.jpg
I have not doen it yet at my house but Regular house paint on the pipe outside lasted 13 years at my old store on 8 different pellet vents I had going out and up.
after you paint it you will never notice the pipe outside. Just like an Electrical meter or anything els that has to be hung on your wall.
http://www.hearthtools.com/pellet/enviro/omegaoutwall.jpg
The extra length of pipe on top is because my last stove. Sooted up the Weather Head on my Power coming to my house
so I added 2 more feet.
http://www.hearthtools.com/pellet/enviro/omegaoutwall2.jpg
Putting the Legs on
http://www.hearthtools.com/pellet/enviro/IMG_7960omega.jpg
Panels off so the wife could paint them.
http://www.hearthtools.com/pellet/enviro/omegasidepaint.jpg
http://www.hearthtools.com/pellet/enviro/omaega_room.jpg
Much cleaner inside look and gets the stove closer to the wall.
Ok I have had 5 different stoves in this location so the hole is larger and I used sheetmetal to cover the large hole
but here is the picks of my Omega that my almost 3 year old install for me.
http://www.hearthtools.com/pellet/enviro/IMG_7946omega.jpg
http://www.hearthtools.com/pellet/enviro/IMG_7951omega.jpg
http://www.hearthtools.com/pellet/enviro/omegacornerpipe.jpg
http://www.hearthtools.com/pellet/enviro/omegacornerpipeside.jpg
I have not doen it yet at my house but Regular house paint on the pipe outside lasted 13 years at my old store on 8 different pellet vents I had going out and up.
after you paint it you will never notice the pipe outside. Just like an Electrical meter or anything els that has to be hung on your wall.
http://www.hearthtools.com/pellet/enviro/omegaoutwall.jpg
The extra length of pipe on top is because my last stove. Sooted up the Weather Head on my Power coming to my house
so I added 2 more feet.
http://www.hearthtools.com/pellet/enviro/omegaoutwall2.jpg
Putting the Legs on
http://www.hearthtools.com/pellet/enviro/IMG_7960omega.jpg
Panels off so the wife could paint them.
http://www.hearthtools.com/pellet/enviro/omegasidepaint.jpg
http://www.hearthtools.com/pellet/enviro/omaega_room.jpg
- Status
Similar threads
