PDV-25 Englander room air blower problems

[brian tobin]

The room air blower will not work, I have replaced it with a new 250cfm the model englander website lists. I have also replaced the temp sensor cable and the buss fuse.

What is the operating temperature that activates the blower supposed to be?

What else could be the problem?

I really don't want to replace the control unit as it is kinda pricey.

 

[BUBIBEAR]

Year and type of stove would help .

 

[Mt Bob]

Well you probably need a sensor or control board.http://www.heatredefined.com/assets/images/general/PUCBHS_thermalsensor.pdf

 

[brian tobin]

Year and type of stove would help .

englander PDV-25 pellet stove 2003

 

[brian tobin]

Well you probably need a sensor or control board.http://www.heatredefined.com/assets/images/general/PUCBHS_thermalsensor.pdf

I replaced the sensor so I guess that just leaves the control board.

 

[ericofmaine]

I replaced the sensor so I guess that just leaves the control board.

Just for giggles, did you make a jumper cable and plug the motor directly into an outlet? Mine was acting the same way and that's how i discovered it was a bad chip on the circuit board. I will say, don't do it if you're not comfortable with 120 VAC.

Eric