PowerSharp

Post in 'The Gear' started by Gunks, Oct 2, 2011.

Thread Status:
Not open for further replies.
  1. Gunks

    Gunks
    Expand Collapse
    Member

    Joined:
    Oct 27, 2009
    Messages:
    219
    Likes Received:
    2
    Loc:
    Ulster Cty, NY

    Helpful Sponsor Ads!





  2. MasterMech

    MasterMech
    Expand Collapse
    Guest

    You have to buy a special Bar/Chain combo. Will not work for regular chains. I'll pass. I can buy a lot of files for the $60 or you can buy a grinder for $120 or less.
     
  3. wendell

    wendell
    Expand Collapse
    Minister of Fire

    Joined:
    Jan 29, 2008
    Messages:
    2,026
    Likes Received:
    10
    Loc:
    Madison, WI
    For the weekend cutter or someone who take their chains to someone to sharpen, I think they are great. The system works amazingly well for the first half of the cutters life but have heard it doesn't work as well later on. I think what you need to do is touch up the rakers by hand as they get a little long in comparison to the cutter over time.
     
    Collapse Signature Expand Signature
Thread Status:
Not open for further replies.

Share This Page

Entire Site copyright © 1995-2016 - email to webinfo@hearth.com
Hearth.com and HearthNet are property and trademarks of Hearth.com LLC Advertising Information