Ran gas line, won't hold pressure?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
One of our plants had a vapor deposition area, but I never worked there. I did work a lot on a Steigerwald EB hole driller. It used a state of the art PDP8 computer. It was a pretty good machine, hardly ever any leaks, but it ate a filament every 8 hours, and it took about ½ hour to install and adjust a new one. I didn't work on any of the pipework, that was a mechanics' job. I did the electronics.
 
Status
Not open for further replies.

Similar threads

N
New set up of an old boiler with storage
Replies
10
Views
2K
The Boiler Room - Wood Boilers and Furnaces
all night moe
A
Poindexter
Choosing and hitting BTU/hr targets with propane burner heads for canning
Replies
9
Views
5K
DIY and General non-hearth advice
Poindexter
Poindexter
L
Advice needed for Waterfurnace Envision Series Install
Replies
2
Views
667
DIY and General non-hearth advice
sloeffle
sloeffle
D
Chimney Fires White Paper - Read This!
Replies
14
Views
2K
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
F
Installed my Regency F5200
Replies
0
Views
895
Regency
farmwithjunk
F
Top Bottom
Back