resistance value of a new EKO40 temperature sensor

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
EffectaBoilerUser (USA)

EffectaBoilerUser (USA)

Member
Aug 23, 2010
202
Michigan
www.effecta.us
Does anyone happen to know (or can you measure) the resistance of the hot water temperature probe on an EKO40.

A friend of mine rec'd the E1 error today and thus I'm trying to locate a temperature sensor with the proper resistance value for him.

Thanks,

Brian
 
Status
Not open for further replies.

Similar threads

P
Froling P4 Error: Combustion air supply faulty or blocked
Replies
3
Views
1K
The Boiler Room - Wood Boilers and Furnaces
phollands
P
D
Harman Red ESP sensor and room temp voltage during operation?
Replies
2
Views
907
The Pellet Mill - Pellet and Multifuel Stoves
dimondjack
D
Niel
New Monia: No response on temperature control
Replies
4
Views
481
The Pellet Mill - Pellet and Multifuel Stoves
Pascal_Maertens
Pascal_Maertens
J
Hooking up Any Smart Wifi Thermostat to Harmon P68
Replies
7
Views
4K
The Pellet Mill - Pellet and Multifuel Stoves
hlthy
H
E
Buffer Tank / Thermal Storage needed/recommended for new Pellet/Log Boiler?
Replies
9
Views
3K
The Boiler Room - Wood Boilers and Furnaces
Expat_Latvia
E
Top Bottom
Back