Seeking Emviro M55C-FS technician's manual

[nailed_nailer]

Hey there,

In the ounce of prevention is worth........thought.......

Loving my M55. No issues to date.

It came with two flimsy manuals.
50-2100 M55C-FS Owners manual
and
50-2101 M55C-FS Technical Manual.

Both in a word ......er........SUCK!

Is there a real technical manual for these stoves available.

I have the POP-093 Pellet Stove Service Manual but it really doesn't go into the M55C much.
Not sure if there any technical differences between the M55C and the steel M55

If I read the manual correctly the M55 uses the DHC-4110 control board is that also true for the M55C?

Is there a better manual that I should have?

Any help is appreciated.

---Nailer---

 

[jtakeman]

Hi nailer,

Here's a link to the latest tech manual on enviro's site. #C-12003

http://tinyurl.com/d77no68

I hear many complaints about the manuals Enviro has out. What is it that sucks about them? Maybe we should flood them with some emails!

Here is a chart on the feed rates and agitator cycle info. Not in any manuals AFAIK. Was shared by a Enviro tech to me to assist with peoples questions. Enviro's tech's will not post here as they are afraid web will think they are advertising there products here!

 

[jbfrost912]

I have also been trying to find a good tech manual for the M55-Cast.
I found another tech manual, but it is not specific for the M55 (pretty much every other enviro product), but could be ok for other troubleshooting stuff.

http://www.enviro.com/images/manuals-brochures/owners-manuals/C-12145 Instruction PELLET Service Manual.pdf

Sorry, can't seem to make it a link.

Jon

 

[whlago]

Hey there,

In the ounce of prevention is worth........thought.......

Loving my M55. No issues to date.

It came with two flimsy manuals.
50-2100 M55C-FS Owners manual
and
50-2101 M55C-FS Technical Manual.

Both in a word ......er........SUCK!

Is there a real technical manual for these stoves available.

I have the POP-093 Pellet Stove Service Manual but it really doesn't go into the M55C much.
Not sure if there any technical differences between the M55C and the steel M55

If I read the manual correctly the M55 uses the DHC-4110 control board is that also true for the M55C?

Is there a better manual that I should have?

Any help is appreciated.

---Nailer---

Nailer,
Is this the manual you have?

http://www.enviro.com/images/manuals-brochures/owners-manuals/C-12145 Instruction PELLET Service Manual.pdf

Great manual but doesn't include the M55 in any of the tables. I would also like to find the same manual for the M55 Cast FS.

 

[jtakeman]

I have also been trying to find a good tech manual for the M55-Cast.
I found another tech manual, but it is not specific for the M55 (pretty much every other enviro product), but could be ok for other troubleshooting stuff.

http://www.enviro.com/images/manuals-brochures/owners-manuals/C-12145 Instruction PELLET Service Manual.pdf

Sorry, can't seem to make it a link.

Jon

Jon, Use tinyURL as this site doesn't like spaces or % 20 in the links.


C-12145 Instruction PELLET Service Manual here:

http://tinyurl.com/43jw7ly

 

[whlago]

Hey there,

In the ounce of prevention is worth........thought.......

Loving my M55. No issues to date.

It came with two flimsy manuals.
50-2100 M55C-FS Owners manual
and
50-2101 M55C-FS Technical Manual.

Both in a word ......er........SUCK!

Is there a real technical manual for these stoves available.

I have the POP-093 Pellet Stove Service Manual but it really doesn't go into the M55C much.
Not sure if there any technical differences between the M55C and the steel M55

If I read the manual correctly the M55 uses the DHC-4110 control board is that also true for the M55C?

Is there a better manual that I should have?

Any help is appreciated.

---Nailer---

Nailer,
Is this the manual you have?

http://www.enviro.com/images/manuals-brochures/owners-manuals/C-12145 Instruction PELLET Service Manual.pdf

Great manual but doesn't include the M55 in any of the tables. I would also like to find the same manual for the M55 Cast FS.

Haha I see I basically wrote the same post (and made the same mistake with the link) as Jon did above...I'm a slow typer!!

 

[jbfrost912]

I have a question about the tech manual on page 40. It says that you can change the proram. What programs are they talking about?

Jon
http://tinyurl.com/43jw7ly

 

[jtakeman]

I have a question about the tech manual on page 40. It says that you can change the proram. What programs are they talking about?

Jon
http://tinyurl.com/43jw7ly

DHC 4100 is a universal control board. Part number 50-1929. See photo of the programs.

 

[jbfrost912]

I see on the chart it is not for the M55.

Thanks.

 

[jtakeman]

I see on the chart it is not for the M55.

Thanks.

Correct, M55 uses the DHC 4110 and its in the service manual. Check page 11 and 28 for details.

 

[jbfrost912]

trying to do too many things at once, I didn't see the difference between 4100 & 4110. ( I missed the extra 1).

 

[jbfrost912]

I just looked at my circuit board. The part number is DHC5501-H.