US Stove Model 5500 Problem

Post in 'The Pellet Mill - Pellet and Multifuel Stoves' started by greginpa, Nov 5, 2009.

Thread Status:
Not open for further replies.
  1. greginpa

    greginpa
    Expand Collapse
    New Member

    Joined:
    Nov 5, 2009
    Messages:
    1
    Likes Received:
    0
    Loc:
    N.E. PA
    Hello, I'm new to the board and live in PA. Anyway, I did a quick search and didn't really find what I was looking for. Maybe someone here can help me out. I bought a US Stove model 5500 that was used. The person I bought it from says it works but it doesn't. It is vertically vented with new Simpson Dura Vent pipe and I replaced the door gasket. When fired up it does not stay lit. It will either shut itself down or stop feeding pellets and it will go out. The fuses are all good by the way. I've also called the factory and they really didn't much help," check the door gasket." Well I replaced it hoping for the best and it still will not run. Any ideas???? Thanks in advance.
     

    Helpful Sponsor Ads!





Thread Status:
Not open for further replies.

Share This Page

Entire Site copyright © 1995-2016 - email to webinfo@hearth.com
Hearth.com and HearthNet are property and trademarks of Hearth.com LLC Advertising Information