My VC Encore, classic black finish has developed paint deterioration on the front doors and sides of the unit. Not so much the top. It looks slightly rusty as well. Its not really chipped or flaking, as much as its just eaten away. Its only 1 year old, installed last February. I first noticed this beginning this summer. Curious if this is a humidity issue. Has anyone experienced this? I'm thinking about touch up paint, but its quite extensive.
I've heard an over-fire could cause this, but would assume the top of the unit would be affected as well, if that were the case. I do run it hot, but never over-fired. According to the VC manual, an over-fire on this unit is when you see any part glowing red. The hottest its been fired is 750 when I forgot to close the flue or air control one or two times, but no red glow (thankfully).
Any advice appreciated.
I've heard an over-fire could cause this, but would assume the top of the unit would be affected as well, if that were the case. I do run it hot, but never over-fired. According to the VC manual, an over-fire on this unit is when you see any part glowing red. The hottest its been fired is 750 when I forgot to close the flue or air control one or two times, but no red glow (thankfully).
Any advice appreciated.