- Nov 28, 2012
- 8
I am a new pellet stove owner, I have also been lurking around hear trying to learn as much as I can. Anyhow I bought a house that came with this StCroix Prescott (9-94 build date)to heat the garage. The stove was sitting in the corner not hooked up. This fall I installed the stove and soon found the auger feed not working properly. I had determined the auger motor to be the cause.... Installed the new motor and same symptoms as before. I have been going through the owners manual trouble shooting guide, and everything seems to check out mechanically. I tested both auger motors in a test cord as sudjested on this forum. Both motors turned at the advertised 2rpm. My final conclusion is the control box must be faulty? If anyone has any input or others ideas what could be causing my issues it would be greatly appreciated. I might add that the stove burns great, it just won't feed pellets to keep the fire going. Thanks in advance! -Curtis