what is the differnce of the roof or wall

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
kscowboy

kscowboy

New Member
Dec 30, 2009
99
kansas
I will be puting class a through the roof and was wonder about the whole size need for 6inch class a and what would be used to go through would it be somthing like a wall themble
 
Roof or wall, class A needs at least 2" clearance in all directions. 6" class A is about 8" in diameter so it needs a minimum of a 12" hole. Going through the roof, the hole will be oval, at least 12" wide. Length will depend on the pitch of the roof. If at all possible, take it straight up on the inside of the house for the best performance and easiest cleaning.
 
Status
Not open for further replies.

Similar threads

B
Ventless gas w/ no chimney to wood insert
Replies
13
Views
765
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
MedicineMan4040
Big day draws near
Replies
8
Views
539
The Hearth Room - Wood Stoves and Fireplaces
MedicineMan4040
MedicineMan4040
H
Stovepipe adapters and fittings.
Replies
0
Views
373
The Hearth Room - Wood Stoves and Fireplaces
Hbob
H
I
Installing wood stove in metal pole barn. Question on BOM.
Replies
12
Views
2K
The Hearth Room - Wood Stoves and Fireplaces
Ivan88
I
C
Where to put the "T" for installation through the wall - does it have to be mounted to the wall?
Replies
39
Views
1K
The Hearth Room - Wood Stoves and Fireplaces
all night moe
A
Top Bottom
Back