1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Hearthstone Soapstone and Cast-Iron stoves( Wood, Gas or Pellet Stoves and Inserts)
    Caluwe - Passion for Fire and Water ( Pellet and Wood Hydronic and Space Heating)

WHITFIELD PROFILE BLOWER MOTOR

Post in 'The Pellet Mill - Pellet and Multifuel Stoves' started by STUFFINEYE, Nov 21, 2008.

Thread Status:
Not open for further replies.
  1. STUFFINEYE

    STUFFINEYE New Member

    Joined:
    Nov 21, 2008
    Messages:
    1
    Loc:
    FREDERICKSBURG VA
    My pellet stove blower only seems to work on one speed, of course the low speed. Pellets feed fine, the stove is firing up great. We have set the thermostat for 70 and it is stopping and starting great. The blower is just only blowing on one speed and it aint high. So normally, the temperature in the rooms downstairs will get anywhere from 78 to 79 degrees but now we can barely get 71 or 72 degrees running constantly due to the blower speed. Please anybody out there with any suggestions on where to start our troubleshooting would be greatly appreciated before we have to call a repairman out. The stove is 4 years old and was installed by professionals. Never had any problems with it until this year.


    Thanks Stephanie

    Helpful Sponsor Ads!





Thread Status:
Not open for further replies.

Share This Page