Yankee bay not feeding pellets

[txiko]

Hi:
I have a Yankee Bay insert from Lopi and last night it stops feeding pellets.
I had cleaned the hopper and put a few pellets and I can see the auger
trying to spin. Any hep on how to address the problem?
Thanks

 

[txiko]

All running again.
The auger was stuck I have cleaned and I didn't realize
that it takes between 7 to 10 minutes to work again.
Thanks

 

[jtakeman]

Shouldn't take that long to work again. Might be a plugged vacuum nipple/hose?

 

[txiko]

It could be, I don't know I read about the time in
a trouble shouting guide.
The stove is working, what I noticed is that there are a lot more pellets in the fire pot now than before.
Thanks

 

[imacman]

Auger should start as soon as stove is turned on. It's possible that the connection between the auger motor and auger is loose.....there is a set screw that holds them connected. The set screw should be tightened against the flat part of the auger shaft....check it out.