075 Stihl

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
More coin. I never did ask what bar if any came with it but it's not a big deal.

zap

075-42 and 090-48 660-36. Now start a milling school and get free labor! ;) Better yet charge them! :)
 
  • Like
Reactions: zap and ScotO
075-42 and 090-48 660-36. Now start a milling school and get free labor! ;) Better yet charge them! :)

Might as well offer a course in sharpening too. That's a lot of cutters to maintain. I don't envy that...
 
Might as well offer a course in sharpening too. That's a lot of cutters to maintain. I don't envy that...

It takes all aspects to make a good csm'er.......With Zaps set-up its pretty easy to knock out 1500 drive links in under 2 hrs. (With the right person)
 
  • Like
Reactions: DexterDay and ScotO
It takes all aspects to make a good csm'er.......With Zaps set-up its pretty easy to knock out 1500 drive links in under 2 hrs. (With the right person)
The best thing is the money you save sharpening your own chains, especially when I started milling. At the rate I'm going the grinder will be paid for by the start of next summer if not before.

zap
 
Honestly, with all that plastic on these newer saws Bigg Redd, I highly doubt it.
Just hooked up the old plow to the old green truck, worked like a charm after sitting for three years(changed the fluid) so the Stihl 090 is in the bag.
zap
 
  • Like
Reactions: ScotO
Just hooked up the old plow to the old green truck, worked like a charm after sitting for three years(changed the fluid) so the Stihl 090 is in the bag.
zap
Nice job Zap.... Im sure you had some good times in that Green Chevy. But that 090 will provide many good times to come.. ;)

Waiting on Pics! !!
 
  • Like
Reactions: ScotO
Nice job Zap.... Im sure you had some good times in that Green Chevy. But that 090 will provide many good times to come.. ;)

Waiting on Pics! !!
Dex, I just found the tripod for taking movies with the camera while milling, maybe this weekend. I have a nice topped off Hemlock that will come down for milling.

zap
 
Dex, I just found the tripod for taking movies with the camera while milling, maybe this weekend. I have a nice topped off Hemlock that will come down for milling.

zap
Double "Like" this one!!
 
You'd be amazed in what you can build with just a drawknife,spokeshave,10pt crosscut saw, brace/set of auger bits,cabinet scraper & block plane/smooth plane/jointer plane.
 
You'd be amazed in what you can build with just a drawknife,spokeshave,10pt crosscut saw, brace/set of auger bits,cabinet scraper & block plane/smooth plane/jointer plane.

Oh man, Thats a little fancy for me.....lol I did pick up a free joiner this year. Mini mill sure comes in handy if you need to break down a big slap. I would add fosner bits and plug makers and your set. :)
 
Status
Not open for further replies.