j-takeman vs imacman

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
Between the two of you, who has the most posts in a 24 hour period? How many posts?
 
If my math is correct.

JT averages 7.73 post per day.

Mac averages 6.59 posts per day.

For a difference of 1.14 post per day.

Let the jokes begin now..............
 
smoke show said:
If my math is correct.

JT averages 7.73 post per day.

Mac averages 6.59 posts per day.

For a difference of 1.14 post per day.

Let the jokes begin now..............

And you say I got to much time on my hands! ;-)

vvvvv My reply to below so I don't raise my count vvvvv %-P
 
Where the ____ has johnny been.

Lookin for updates.

Far as I can tell Jays kickin ___.
 
kinsman stoves said:
This is my install crew, Need I say more?

Eric



Hey....aren't those the guys who sell those Amish electric heaters? They install pellet stoves too!?
 

Attachments

  • amish-mug-shots-600x394.jpg
    amish-mug-shots-600x394.jpg
    26.5 KB · Views: 177
VTrider said:
kinsman stoves said:
This is my install crew, Need I say more?

Eric



Hey....aren't those the guys who sell those Amish electric heaters? They install pellet stoves too!?

That's them...But remember, the heater is free, you just pay for the Amish made mantel...LOL
 
Looks like J is in control on this one.

Only a serious return of warm weather and boating might distract him enough to let Imacman catch up.
 
Diggin up bones Vinny?

Where the hell is Johnny these days anyway?
 
I blame the new Forum setup for putting the Message Count under the User name.
 
Today could be the day my friends. Today could be the day. I'm a little worried that when it happens, I'm gunna pee a little bit.
 
  • Like
Reactions: DexterDay
I'm rooting for Jake!!!
I think Mac has been tangeling with these guys, not that there is anything wrong with that;)100_2911.jpg
 
  • Like
Reactions: jtakeman
That new job of Jay's must give him a LOT of free time to post here....YIKES!

I remember back during the winter when we were only 60-70 posts apart.....now it's 850 _g

;lol
 
  • Like
Reactions: Defiant
That new job of Jay's must give him a LOT of free time to post here....YIKES!

I remember back during the winter when we were only 60-70 posts apart.....now it's 850 _g

;lol
We still like you ==c
 
Well I have my money on Imacman, but then again im biased, The man came to my house to help me change the gaskets on my Breckwell P22 and woudlnt accept anything other than a smile and a hand shake for payment. Pete I havent been on in a few weeks, at least on this forum, but Im forever greatful for your help. Thank you again, hope you are well. Maybe we can catch up one of these days and have a cold one and watch the yankees beat up on someone.
 
Well I have my money on Imacman, but then again im biased, The man came to my house to help me change the gaskets on my Breckwell P22 and woudlnt accept anything other than a smile and a hand shake for payment. Pete I havent been on in a few weeks, at least on this forum, but Im forever greatful for your help. Thank you again, hope you are well. Maybe we can catch up one of these days and have a cold one and watch the yankees beat up on someone.
Thanks for the support ;)
I'll hold you to that cold one and watching the Yankees. Hope the family is well, and the stove is running well too. Pretty chilly tonight (41 here right now and raining cats & dogs)....stove is purring along.
 
Yes sir. We are all doing well and stove is running great. The glass is very clean. yes the rain is coming down hard now. Hey I finished the 3 bedrooms with the oak floors. When you were here the house was upside down with all the mess from the construction. I posted some pics on the DIY forum. They came out pretty decent for a first timer. Thanks again.
 
Status
Not open for further replies.