Now this is a stove

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
This may not be pretty but it would be great for heating a big farm house. Claims 200,000 BTUs and really long burn times. Given the size of that firebox, I have no doubt a big custom woodstove would blow the doors off any conventionally manufactured non-cat stove. If I had $$$ and a big property with outbuildings and such, I would be by-passing the traditional stove makers and looking for custom designers to build huge stoves that could take equally big splits.

http://www.jimbonham.com/Stove/
 
If I needed that size I would rather be heating with a clean-burning stove or more likely a Caddy wood furnace that is a lot more efficient. The reduction in wood consumption alone would be worth it.
 
If I needed that size I would rather be heating with a clean-burning stove or more likely a Caddy wood furnace that is a lot more efficient. The reduction in wood consumption alone would be worth it.

His point does make sense though. By taking a 36" log length, you are basically doing half the work. My little Heritage is good, but I do wish I have a 4 cubic firebox at times when it's 10 degrees outside and blowing.
 
His point does make sense though. By taking a 36" log length, you are basically doing half the work. My little Heritage is good, but I do wish I have a 4 cubic firebox at times when it's 10 degrees outside and blowing.

Seems like a different issue. From what I can gather it seems like a Mansfield would have worked better for you. That''s a quantum leap better solution.
 
Seems like a different issue. From what I can gather it seems like a Mansfield would have worked better for you. That''s a quantum leap better solution.

I cannot completely disagree that one size greater would have been better. Such is life. Trial and error.
 
You would not be the first to make this error. I speak from personal experience.
 
You would not be the first to make this error. I speak from personal experience.

I may add another stove. Seems like I can get it done for the cost of a Mansfield. I could add an Englander for $2k with install given the location and the fact that the first install needed 24 feet of pipe and the next one would need only 14 feet with about 10 feet less of class A. We'll see. Could always just run the furnace on the really cold days as my wife has pointed out. 92% high efficient natural gas. That's logical, but it feels like defeat all the same. Logic is not always what a man wants to hear.
 
His point does make sense though. By taking a 36" log length, you are basically doing half the work."

One issue with 36" long logs is finding a spliter that will split something that long. It would be hard to split somthing that long by hand unless it is very straigt grain. My boiler will take 30" long piecies and that's plenty long IMHO. Most spliters I've seen only go to 26"
 
  • Like
Reactions: pen
Yes, it looks like his source of fuel is wood slabs which he probably scrounges for free and slices to stove length.
 
When I was up in Maine visiting my sister I saw an ad from a guy up there doing something similar, building a big ass stove, I remember wondering how many cords the beast would eat in a year.
 
  • Like
Reactions: firecracker_77
I love it - a wheel barrow half full of wood with the statement "on a small amount of fuel it will run for hours";lol
 


A stove loaded with firebrick is a warning sign! Manufacturers use firebrick to protect thin firebox walls. As a result the heat is slowed from getting to the outside, causing heat loss up the chimney. Firebrick will have to be replaced yearly and if a brick falls out of place, a hole will be burned through the firebox, rendering the stove unusable . Brick also reduces the size of the firebox.

I am sure he will also tell you to burn a soda can in it every week to keep down the creosote. Some people just can't understand why stove manufacturers do things like put in firebrick to keep the heat in the firebox for better combustion. At least he was smart enough to put a basic baffle in that thing.
 
  • Like
Reactions: woodsmaster
Status
Not open for further replies.