Quality wedges

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

bryan

Member
Aug 10, 2012
108
Wilmington, NC
This will be my first winter burning, but up to this point I've split all my wood using a sledge and a couple straight wedges. It works fine and I enjoy it, but either I don't remember my childhood well enough or the wedges these days are made of play-doh. Is there a quality manufacturer of wedges out there? Would I be better off buying a maul so I am not using the wedges so intensely and having to keep dressing them to address their mushrooming.
 
thats good ole' american imported steel for you. Sorry, I gave up hand splitting and went hydro!
But you are doing the right thing by dressing them because eventually a chunk will come flying off and could be dangerous.
 
  • Like
Reactions: Thistle and smokinj
thats good ole' american imported steel for you. Sorry, I gave up hand splitting and went hydro!
But you are doing the right thing by dressing them because eventually a chunk will come flying off and could be dangerous.

I had a grandfather who lost an eye from a metal shard (was a maintenance man at the local mine) and thus taught the importance of dressing them.
 
  • Like
Reactions: ScotO and Nixon
Might just want to spend a little money and get a good maul or X27. Its good to have an assortment of splitting equipment. I have the manual splitting equipment but will some day have either electric or hydo...or both.
 
  • Like
Reactions: Thistle
By hand, I would use my X27 and maybe my 8lb maul as a change of pace. I quit using the 10lb sledge & wedges when I realized that it's more dangerous than my comfort level. The rest would get noodled with a chainsaw.

If I really wanted to use wedges, I'd try to find some old USA made wedges secondhand.
 
Bryan, I'd also get a splitting maul in either 6 or 8 pounds. You will notice the splitting goes much faster with less work. Save the wedges for the knotty logs.
 
  • Like
Reactions: ScotO and Thistle
If I really wanted to use wedges, I'd try to find some old USA made wedges secondhand.

Lots still out there with a little searching.Ebay,local garage/estate sales,flea markets,farm/estate auctions.Can still be found quite cheaply, sometimes less than 1/2 the cost of the vastly inferior new chinese,indian & mexican ones. I've had mine 20 to 30 yrs now,they were mere pennies per pound.
 
Sounds like its time to hit up the local flea market for some wedges and a maul. The X27 sounds like prime christmas gift material
 
Lots still out there with a little searching.Ebay,local garage/estate sales,flea markets,farm/estate auctions.Can still be found quite cheaply, sometimes less than 1/2 the cost of the vastly inferior new chinese,indian & mexican ones. I've had mine 20 to 30 yrs now,they were mere pennies per pound.

I fully agree. I think ours are about 60 year old or more. I didn't buy them new so God only knows how old they are.
 
  • Like
Reactions: ScotO
Gransfors bruks makes a wedge. Forged steel. Costs $$ though
 
  • Like
Reactions: buggyspapa
I had a grandfather who lost an eye from a metal shard (was a maintenance man at the local mine) and thus taught the importance of dressing them.

++1 on the the advise to dress the wedge. I once had shrapnel nail me badly in the leg, bled like a stuck pig and it scared the %*(#) out of me. Blood was literally spurting out like a geyser.
I searched high and low for good quality wedges - everything I tried mushroomed on the first couple smacks. I have some of my Dad's wedges from the 1950's - now those are made of good steel.
The wood around here just laughs at a maul, everything is kind of knotty or twisted. Best thing I ever did was get a hydraulic splitter!!
 
  • Like
Reactions: Thistle and ScotO
Gransfors bruks makes a wedge. Forged steel. Costs $$ though

I have the Gransfor bruks wedge, works great hand made from forged steel and very expensive, if you dont mind spending the money i highly recommend it
 
Status
Not open for further replies.