agitator grease

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

corkman

Minister of Fire
Dec 3, 2009
721
SE,Mass
stove agitator is making some noise.what is the recommended grease to use,where do i put it and how often should this be done.none came with the stove .
 
Cork,
With my M55C,

Enviro included the anti-seize tube in the documents package that came with the stove.
The supplied tube was
Loctite C5-A
Available at any autoparts place or Amazon for around $7.00 a can.
http://www.amazon.com/Loctite-C5-Anti-Seize-compound-brush/dp/B000LDDOXG

It did the job for me.

Coat the left end of the rod. The non-drive end.
It takes care of the squeak

---Nailer---
 
Nailer.i have a high heat no seize lubricant made by carquest that i got at auto parts store.rated up to1600deg.its the stuff we used that day on the t-cleanout.good?
 
Nailer.i have a high heat no seize lubricant made by carquest that i got at auto parts store.rated up to1600deg.its the stuff we used that day on the t-cleanout.good?
That will work just fine.
 
Status
Not open for further replies.