Wood Storage

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
I also like my 10x20 wood shed
Thats a mighty fine wood shed there!

InfinityMike those are some impressive stack you got there I hope yall made it through Sandy without to many problems Im sure your goignt to be getting quite a lot of wood from her for the next couple of months.
 
  • Like
Reactions: tigger
Thanks mattjm. Actually can anybody see the pics right now? All I see is little boxes with a ? inside.

I made it through Sandy without any propoerty damage and without power for 9 days. Well I can't really complain I do have a generator.

I allready score about 2 cord
 
Mine are similar to K.P. Have four of these.
4th Rack Build 3.jpg
 
I designed these racks that each hold 1 1/2 face cord for a total capacity of 7.5 face cords, plus a half face cord rack on our back porch. We average consume 5.5 face cords a season. Though fairly open, the wood stays mostly dry from rain and snow. I have an assembly line type arrangement where I off load large logs from trailer, split, and toss in front of the rack for my wife to stack.

Hi, welcome to the forum. Nice racks.

Can you convert that to cords for me? I am not that good at math, plus I have no idea what a face cord means to you, hence I have no idea what you are saying.
 
Thanks mattjm. Actually can anybody see the pics right now? All I see is little boxes with a ? inside.

I made it through Sandy without any propoerty damage and without power for 9 days. Well I can't really complain I do have a generator.

I allready score about 2 cord

your pics do not show up for me either. Maybe try and repost them
 
Huh same problem. I've never had a problem before. Oh well.
 
Infinitymike I still see them dont know why others cant very strange.
 
Hi, welcome to the forum. Nice racks.

Can you convert that to cords for me? I am not that good at math, plus I have no idea what a face cord means to you, hence I have no idea what you are saying.

Without considering log measurement, three face cords equals a full cord of wood. Each rack holds a half cord.
 
Welcome
Awesome!
Very nice set up.
Wood racks with a roof = wood shed. IMO ;)

I beg to differ. If it was a wood shed, I wouldn't be allowed to have something like that in my front yard according to county building regulations...so they're RACKS ;)
 
Without considering log measurement, three face cords equals a full cord of wood. Each rack holds a half cord.

Thanks.
 
I beg to differ. If it was a wood shed, I wouldn't be allowed to have something like that in my front yard according to county building regulations...so they're RACKS ;)

Same game here. I have a temporary wood port, not a permanent (building) wood shed. No floor or sides ;)
 
Nice racks guys!! Ive got some questions though what is a "face cord"? and what is the benefit of stacking your wood like backwoods savage and bogey dave? Pallet pete thats exactly what I want to do how did you connect the pallets in the middle or are they even connected?

Advantages can be that you can stack a full cord in each segment. It also just happens to work out nicely for the covers we use (old galvanized roofing). As for drying, we have no problems with this but remember that we are almost always many years ahead on our wood supply to it all has time to dry nicely. Another advantage is cost. I cut saplings and use to stack the wood on. Sometimes I don't even use those and stack right on the ground but we can do that here when stacking on higher ground as we are on yellow sand. I also do not end up with ugly pallets laying around after removing the wood from the stacks.

In addition, both Dave and I dry our wood outside where wind can do its thing. Then before winter is when we move enough wood into the barn for that winter's burning. But there are many ways of handling the wood. This just happens to be the one which has worked out best for us.
 
  • Like
Reactions: Nixon
Hi, welcome to the forum. Nice racks.

Can you convert that to cords for me? I am not that good at math, plus I have no idea what a face cord means to you, hence I have no idea what you are saying.

I love sharing this link I found a few years back. You put in the height and length of your wood pile, and then the average length of the cuts and this tool converts it to cords for you!

http://www.maine.gov/ag/firewood.html
 
  • Like
Reactions: Nixon
We cross stack (or I should say *I* cross stack, dh creates scary tippy stacks, lol-so he splits and I stack) on pallets. We also have a few racks we built for small rounds since those are a pita to stack. Those are simple 2x4 construction, 8' long, about 6' tall and 18" deep. We built those because we were getting a lot of decent sized branches and tree tops scrounging-they were too small to split but too big to waste, so pretty much anything 2-5" in diameter goes into those. Those, by far, look the nicest as far as I'm concerned. I guess they look more "traditional", like old school wood racks would. No shed, no room for one-and we have an "outbuilding limit" here (which is really funny to me, being as rural as we are) so we couldn't build one if we wanted to anyway (we have two storage sheds already, and they are needed especailly given the size of the cottage and lack of a basement). Wood goes from the stack into the house at the moment, no in between.

Our racks for the rounds look pretty much like infinitymike's. Only difference, is we picked up a gallon of cheap paint in the "ooops" section at Home depot for like $10 and painted all of them.
 
I love sharing this link I found a few years back. You put in the height and length of your wood pile, and then the average length of the cuts and this tool converts it to cords for you!

http://www.maine.gov/ag/firewood.html

Oh that is helpful. Looks like we have about 10 cord on hand according to that, that is CSS. Looking at the pile we've got waiting, we're got about another 10 cord to CSS. 'Round here, that puts us at about 60 cord since everyone measures in face cord. That's not counting what we've got earmarked for this year of course. That better set us a few years ahead!
 
I love sharing this link I found a few years back. You put in the height and length of your wood pile, and then the average length of the cuts and this tool converts it to cords for you!

http://www.maine.gov/ag/firewood.html

Thanks. I was actually trying to prompt him to speak in dictionary cords instead of...
 
I love sharing this link I found a few years back. You put in the height and length of your wood pile, and then the average length of the cuts and this tool converts it to cords for you!

http://www.maine.gov/ag/firewood.html

I have a hair under 12 cords, about what I figured, thanks for the link, Im going to save it for future use.
 
I have a hair under 12 cords, about what I figured, thanks for the link, Im going to save it for future use.

If anyone looses this link, just google 'cord wood calculator' and you'll have it.
 
I made pallet pete's design too, 2 racks@ 16x6x6 with air space between rows, and 2x4's to hold up the sides. These each hold approx 3 cords each.

And then the woodshed for the burn ready stuff
 

Attachments

  • uploadfromtaptalk1353164746649.jpg
    uploadfromtaptalk1353164746649.jpg
    216.5 KB · Views: 227
  • uploadfromtaptalk1353164831471.jpg
    uploadfromtaptalk1353164831471.jpg
    133 KB · Views: 202
  • Like
Reactions: Backwoods Savage
For a year here:

DSCN0567.jpg


Then moved to under the deck for winter:

DSCN0640.jpg
 
  • Like
Reactions: Backwoods Savage
Status
Not open for further replies.