Progress Hybrid Sticky Flue Arm

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

Cross Cut Saw

Feeling the Heat
Mar 25, 2012
404
Boulder, CO
This morning I got my fire going, closed my bypass and tried to adjust the flue arm but found it to be very sticky. I wiggled it a little and it wouldn't go past half way. After a little back and forth and some gentle force (I've learned not to force anything I don't want to break) I was able to adjust it.

Anyone have this problem?

I think I saw something about this a while back, but when I searched I didn't find it in any titles and I admit, I'm too lazy to go sifting through all of the comments...

How come this stuff never happens on a Tuesday when you can call the mfg?
 
I have noticed that mine is sometimes a bit more difficult than others - never had it stick like you are describing.

Good news for you though - they are there on Saturday, give them a call. I almost never get to call during the week due to work schedule so I know the weekend crew there is very helpful - but I do think you will have to wait until after 9a eastern :)
 
Good news for you though - they are there on Saturday

That's awesome, I wouldn't have even thought about calling on the weekend! I'll call a little later, thanks for the heads up.
 
This morning I got my fire going, closed my bypass and tried to adjust the flue arm but found it to be very sticky. I wiggled it a little and it wouldn't go past half way. After a little back and forth and some gentle force (I've learned not to force anything I don't want to break) I was able to adjust it.

Anyone have this problem?

I think I saw something about this a while back, but when I searched I didn't find it in any titles and I admit, I'm too lazy to go sifting through all of the comments...

How come this stuff never happens on a Tuesday when you can call the mfg?

CALL WOODSTOCK> They are open today.
EDIT: Sorry...should have read beyond the first post...Let us know what they avised you to do, so we all know what to do if we ever run into the same problem...Thanks.
 
That's awesome, I wouldn't have even thought about calling on the weekend! I'll call a little later, thanks for the heads up.

Please post what they have suggested.
 
This morning I got my fire going, closed my bypass and tried to adjust the flue arm but found it to be very sticky. I wiggled it a little and it wouldn't go past half way. After a little back and forth and some gentle force (I've learned not to force anything I don't want to break) I was able to adjust it.

Anyone have this problem?

I think I saw something about this a while back, but when I searched I didn't find it in any titles and I admit, I'm too lazy to go sifting through all of the comments...

How come this stuff never happens on a Tuesday when you can call the mfg?

I had exactly the same issue. Turns out the rear heat shield was making contact with the air control arm and making it difficult to move (it would also "squeal" when it did move after I applied some elbow grease to it). Look for this contact and if it exists on your stove, it will just take a very slight repositioning of the shield to solve it.
 
I had exactly the same issue. Turns out the rear heat shield was making contact with the air control arm and making it difficult to move (it would also "squeal" when it did move after I applied some elbow grease to it). Look for this contact and if it exists on your stove, it will just take a very slight repositioning of the shield to solve it.

Thanks for posting.
 
Sorry I'm just getting back to everyone on this but I didn't call Woodstock until this morning when I had another issue as well.

The solution was to slightly loosen, then immediately tighten again ONE of the set screws on the shaft collar of the square damper arm, this reset the tension on the arm.

Moving like a hot knife through butter now.

I had the stove off while we were away a couple of days for Thanksgiving and took the opportunity to clean out the cat and do a general all around clean up (no buildup and just a small amount of tannish reddish powder in the top). When I was cleaning the bottom of the cast iron cook top I found a hairline crack in it that went all the way through. They offered to replace it and I will probably take them up on it since my wife wants to put a pot of water on it to humidify the house, but I'll wait until the next time I need to shut it down to do so.

If you have one of these cook tops you might want to take a look at it the next time you have it opened up, he said I wasn't the first person to have a cook top crack...

-Joe
 
Status
Not open for further replies.