Chain P/N help.

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

HJsimpson

Burning Hunk
Apr 17, 2011
125
NE Indiana
Good morning everyone.

Ok here is my question. I am looking for some new chains for my 028 which is 74 links .325 pitch and .063 guage. Most of the stuff i cut is already down and tops and can be a little dirty.

Currently Im cutting about 80% ash with the rest being walnut, elm and other softwoods. I really like the Stihl brand chains but confused on the p/n for what i need. I believe im looking for a semi chisel since the wood could be a little dirty but would like a full chisel for the small amount of clean wood i do get.

Any help or recommendation would be great.

The reason for new chains is during my training period for hand sharpening I kinda got my current chains all outa wack.
 
You have all the info needed , #drive links, Pitch, and gauge. I do not trust MFG part numbers- too easy for J schmuck to toss the wrong item the bin. As to the general question posted the semi chisel will do all you need, A full chisel is not really something you need to accomplish your goal. Want, of course is another area. With the 3 pieces of info you already have you should be able find chains local. Sorry I am not an advocate of any particular brand over another, I cut a lot of wood ( 98% hardwood) every year all I use is semi chisel. Never noted much difference in full chisel other than dulling out faster. Note that you can order on line as well but by the time the shipping & handling charges get added on it could cost more than local purchase or at least as much as.
 
Chains out of wack? Have them professionally sharpened, or have a friend who knows what he's doing have a go at it.

Stihl chains (reference):

RS = full-chisel (RS3 = low kickback version)

That would be: 26RS-74 (26RS3-74)


RM = semi-chisel (RM3 = low kickback verson)

That would be: 26RM-74 (26RM3-74)


NOTE: Late model Stihl chains had a "C" in their numbering system, so that gave us RSC, RSC3, RMC and RMC3. This past year Stihl dropped the "C" from their numbering system to give us the models I first mentioned in this post.
 
  • Like
Reactions: MasterMech
This may help
STIHL Saw Chain chartA.jpg
 
Thats what i was looking for, thanks guys.
At $11 dollars each to have sharpened ill just keep for the extra dirty wood. Besides 2 of them was "professionally" sharpened once before and they took off way to much and removed almost all of the rakers because they aid it cut faster that way.
I just wanted some new chain now that i finally can put a good edge on one with a file.
 
Oregon chains are as good as the major brands

Oregon makes nearly all OEM branded bars/chains. ;)
Except Stihl. The only OEM to make their own cutting tackle.

IME Stihl chain is superior to Oregon. Oregon is not a bad product by any means but until the Stihl stuff becomes cost-prohibitive (and has not been to-date) I'm still recommending/using Stihl chain on any brand of saw.
Word on the street is that Carlton makes some good semi-chisel chain as well, can usually be found at smaller independent small-engine shops and hardware stores.


Besides 2 of them was "professionally" sharpened once before and they took off way to much and removed almost all of the rakers because they aid it cut faster that way.

Someone is begging to get their ass handed to them in a lawsuit.
 
  • Like
Reactions: osagebow
Oregon makes nearly all OEM branded bars/chains. ;)

Word on the street is that Carlton makes some good semi-chisel chain as well, can usually be found at smaller independent small-engine shops and hardware stores.

Oregon & Carlton have the same parent Company.
http://blount.com/ :
" Blount Inc. produces saw chains, bars and sprockets that are well respected in the chain saw and forestry industries and outdoor equipment accessories and parts for the garden and landscape industry. Blount
these products under the brand names OREGON® and Carlton®."




blount.jpg
 
  • Like
Reactions: MasterMech
Oregon & Carlton have the same parent Company.
http://blount.com/ :
" Blount Inc. produces saw chains, bars and sprockets that are well respected in the chain saw and forestry industries and outdoor equipment accessories and parts for the garden and landscape industry. Blount
these products under the brand names OREGON® and Carlton®."




View attachment 86059
Interesting.... Learn something new every day.
 
Status
Not open for further replies.