Is There an Insert With an Thermostat?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
M

Malatu

New Member
Nov 8, 2012
84
I used to own a woodstove back in the mid 80's that had a built-in thermostat that would control the burn. Is there a company that makes an insert that has a built in thermostat?

How reliable are they these days. The stove I owned overheated once in the middle of the night when the thermostat stuck open. That plate iron stove was glowing bright red. Scared the crap out of me.
 
Blaze King Princess Insert. They are reliable.
 
Based on many reviews here, blaze king is the answer.
 
Built in, not really. I think the Buck Stove Catalytic models have built in T-stats. I'm not completely sure though. I know the Buck 91 does for sure. Built in T-stats seems to be a catalytic stove thing. Try the Country Flame BBF and the Kuma Sequoia. Keep in mind that these are all very big inserts. How much space are you trying to heat?
 
kingquad said:
Built in, not really. I think the Buck Stove Catalytic models have built in T-stats. I'm not completely sure though. I know the Buck 91 does for sure. Built in T-stats seems to be a catalytic stove things. Try the Country Flame BBF and the Kuma Sequoia. Keep in mind that these are all very big inserts. How much space are you trying to heat?
Click to expand...

1000 sq ft. I am considering the Clydesdal or the Pacifica T5. Neither are cats. There are things I like about both. If I could put the door of the Clydesdale on the T5, that's the insert I'd purchase.
 
Malatu said:
1000 sq ft. I am considering the Clydesdal or the Pacifica T5. Neither are cats. There are things I like about both. If I could put the door of the Clydesdale on the T5, that's the insert I'd purchase.
Click to expand...
Clydesdale is the best look insert made IMO. But, I'd probably go with the T5 if I were only heating 1000sqft.
 
  • Like
Reactions: Mackj
kingquad said:
Built in, not really. I think the Buck Stove Catalytic models have built in T-stats. I'm not completely sure though. I know the Buck 91 does for sure. Built in T-stats seems to be a catalytic stove thing. Try the Country Flame BBF and the Kuma Sequoia. Keep in mind that these are all very big inserts. How much space are you trying to heat?
Click to expand...

Dont think so, only t-stats I know of is BK and VC.
 
Malatu said:
Why do you favor the T5 over the Clydesdale if only for heating?
Click to expand...
At 1000sqft, I think the Clydesdale could be a bit much. T5 is smaller but can still pull off an overnight burn pretty easily.
 
Todd said:
Dont think so, only t-stats I know of is BK and VC.
Click to expand...
Sorry Todd, I was thinking cat probe thermometers. I was in a post turkey coma while posting last night. Booze wasn't helping my situation either:)
 
Fireplace dimensions usually are the first factor in choosing an insert. What can you fit?
 
mellow said:
If you like to tinker and are handy you could always add on a digital thermostat, check out SmartStove
Click to expand...

How have I never seen this before? Does anyone on hearth have one?
 
Malatu said:
I'd still be interested in why you prefer the T5 over the Clydesdale.
Click to expand...
I'm just thinking for your particular situation. I had a 2.5cuft stove, and they put out a ton of heat. The T5 has a smaller firebox, so it won't throw as much heat. I do prefer the square firebox and the stainless steel baffle of the T5.
 
mellow said:
A basic SmartStove system with the wireless User Interface that supports draft control costs $250.
Click to expand...

Where do you buy them? There web site does not look as though they are selling them direct.
 
I just noticed this thread...

Yes, SmartStove is my product. I developed this starting in 2004 and reached the point in 2010 when I could consider the development completed. The intent has always been to get it integrated into the stove at the manufacturer. In Oct 2010 I visited about 8 different stove manufacturers to get that started. Two purchased evaluation systems, but none as of yet have made the decision to integrate the system. After wearing myself out chasing companies, I've been laying low, and shipping systems to individuals to find my site and demonstrate the fortitude to go through the mechanical work to retrofit their stove. I have figured that it would be good to quietly build an install base to establish a reputation and work out any subtle bugs. To date, SmartStove is running on these stoves throughout the USA: Earth stove, Englander 13, Napoleon 1401, Napoleon 1402, Hampton HI300, Sierra 8000, Regency ZC insert. The system is reliable and repeatable and people using it rarely bother me with any issues.
 
  • Like
Reactions: raybonz
Status
Not open for further replies.

Similar threads

W
Wood burning insert first timer
Replies
10
Views
1K
The Hearth Room - Wood Stoves and Fireplaces
bigealta
bigealta
Jrussbowman
GFI55 questions
Replies
0
Views
310
The Pellet Mill - Pellet and Multifuel Stoves
Jrussbowman
Jrussbowman
Jrussbowman
GFI55 questions
Replies
0
Views
252
The Pellet Mill - Pellet and Multifuel Stoves
Jrussbowman
Jrussbowman
T
  • Locked
Help choosing insert/stove for fireplace
Replies
23
Views
2K
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
M
Remove rotted steel firebox or can it support a wood stove insert?
Replies
1
Views
2K
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
Top Bottom
Back