Anyone used this stove pipe thermometer/alarm yet?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
This looks like it would work great in combination with my wireless web cam that I use to monitor my stove in the basement.

The wireless web cam works great and let's me monitor the wood stove from my iPhone or my computer from anywhere in the house. Perfect for when you are making dinner or helping kids with home work but need to keep an eye on the stove during startup. The problem is that I have to keep the lighst on in the basement so I can see the needle on the stove pipe thermometer and I had to wrap the needle in tin foil so I could see it. This would allow me to see an accurate temp without having to keep the light on.
 
I used to use the iMac glossy screen to do this. Acted like a mirror from which I could keep track of the stove. But the iMac was replaced by an new MacBookPro in a new location. I may need to put up a mirror in the iMac's place.
 
If you don't need the remote alarm you can go with this cheaper version that starts at $55 depending on the probe type and length.

http://www.auberins.com/index.php?main_page=product_info&cPath=17&products_id=281

Both units do have built in alarms. You would hear it fine in the same room but it might not be noticeable from other parts of your house.

I purchased and received the one first mentioned in this thread.
 
I just received my auberins thermometer today with 4" 1/8" probe. My question is: how heigh above my stove top should I install it into the stovepipe? I was thinking 18".
 
I just received my auberins thermometer today with 4" 1/8" probe. My question is: how heigh above my stove top should I install it into the stovepipe? I was thinking 18".

I installed mine at 18" above stove.
 
This is a great little all in one device by the looks of it. I plan on building my own, but this is a good looking unit for somebody wanting one stop shopping with little wiring.

For me, I want one with alarm because there has been times the stove damper has been left fully open for too long and the stovepipe has gotten quite hot.
 
What should I set the high temp alarm at? i.e. at what temp should I close the damper? It defaults at 900 for a high alarm. I was thinking around 1000??
 
Depends a lot on how quickly the flue temps rise up. I can have flue temps up to 1100F and the stove is still fairly "cool" (if starting from a cool/cold stove), and throttling back too much will knock the fire down. It'll depend on your stove and how it reacts. My smaller stove I ran the alarm at 1200F, my new larger stove I set the alarm for 1100F. Keep in mind these are flue gas temps... not pipe surface temps.
 
I contacted Englander today and asked them based on my stove model (30-NC) and my temp probe at 18" above collar, what do they recommend for operating flue temps. They replied between 400 and 700, anything above 700 would be getting too warm. They also said it is not uncommon for temp to drop below 400 on low burns. Based on these numbers I have been burning way too hot and wasting wood. I found out my Rutland was about 700 degrees off (threw that away). I am going to need to be closing my damper much more as this stove likes to go up to 1100 fast. Wished I had known this sooner as I have already burned over 2 cord.
 
I would question the response of 400-700f for flue temps. I'm measuring about 800F and climbing before secondaries ignite. Need to get the wood up to temp and the secondary air up to temp before that combustion will occur... Then you can start throttling down. Eventually you will cruise from 400-700... but not on startup.
 
I've had a digital monitor for stove surface temps for a while now. I wish I had gotten one sooner for the flue. It's really nice to see in almost real time the changes that take place with primary air adjustments. It really shows the impact of an extremely minute air adjustment.
 
Mine started throwing error codes already (only had for 2 days). Contacted auberins and they've already got another one on the way. I think they are pretty delicate but very cool. Oh, and northernontario, I agree. I throttle mine back at 900 (on a reload) and higher on a new fire.
 
I'll have to keep an eye on mine. I gave it a good 3 day run.

Mine started throwing error codes already (only had for 2 days). Contacted auberins and they've already got another one on the way. I think they are pretty delicate but very cool. Oh, and northernontario, I agree. I throttle mine back at 900 (on a reload) and higher on a new fire.
 
Mine started throwing error codes already (only had for 2 days). Contacted auberins and they've already got another one on the way. I think they are pretty delicate but very cool. Oh, and northernontario, I agree. I throttle mine back at 900 (on a reload) and higher on a new fire.

Strange that it's throwing codes. On my home-built alarm (using an Auberins digital PID controller and alarm/flasher), I've been running it almost constantly for I think two years now. No issues.
 
That's a pretty slick little device, there's only one thing I'd like that's a little different, the ability to monitor or switch between two temperature probes. It would be great to place the eyelet one for monitoring the stove top temps, and then the probe to monitor flue temps, one place to go for all your temps!

Then of course the nerd in me asks why we can't find one of these that will hook to wifi and send an email out. :D
 
I use this other Auberins PID to monitor the stove top temps.

https://www.hearth.com/talk/threads/digital-led-temp-readout-and-alarm-installed.76244/


That's a pretty slick little device, there's only one thing I'd like that's a little different, the ability to monitor or switch between two temperature probes. It would be great to place the eyelet one for monitoring the stove top temps, and then the probe to monitor flue temps, one place to go for all your temps!

Then of course the nerd in me asks why we can't find one of these that will hook to wifi and send an email out. :D
 
http://www.omega.com/ppt/pptsc.asp?ref=ISD-TC&Nav=dasc01

If you have a spare $500 sitting around you can have that, someone needs to do a kickstarter for something like this in the $100 range.
Yes this is exactly the model that I've been drooling and drooling about but somehow I suspect after the novelty of all the graphing and testing and tracking wore off I'd go back to basically just using it as a high/low alarm which the Omega DP7000 does for a fraction of the cost. Still this would be so super sweet and would probably allow me to use the stove while I was at work but $500 is absolutely insane. The problem with the DP7000 though is that it is only going to go up to 999F and while that would probably work very well for stovetop surface temps I don't think it would work well for a flue install? Anyway if money were no object I'd opt for this in a split second.
 
Turbocruiser, could you take a picture of your setup of the Omega DP7000. Please explain where and how you set that up.
 
You could always pick up one of the $80 Foscam cameras and point it at one of the less expensive probe options. They have a mobile interface that works well on IOS and Android.

11082512543877.gif


Still this would be so super sweet and would probably allow me to use the stove while I was at work but $500 is absolutely insane. The problem with the DP7000 though is that it is only going to go up to 999F and while that would probably work very well for stovetop surface temps I don't think it would work well for a flue install? Anyway if money were no object I'd opt for this in a split second.
 
Turbocruiser, could you take a picture of your setup of the Omega DP7000. Please explain where and how you set that up.

I'm sorry for any confusion I caused but what I was trying to write was that I'm trying to decide on exactly which way to go for a temperature alarm for the stove. Right now all I'm actually using is a regular stove top surface thermometer and a Laser IR thermometer to tell the temps.

What I've wanted all along was a temperature alarm with at least a high temp alarm and preferably one with high temp and low temp alarms. Then I started thinking that it would be cool to have something setup to either email me or text me a message that would tell me my alarm went over whatever setpoint I setup even if I was away for awhile with stove still on. That led to the iSD-TC that Omega sells which seriously has some amazing functionality to it.

So I've scrubbed all around on several sites to find the best way to work this and although I keep drooling and drooling over all the functionality the iSD-TC has, I keep going back to the DP7000 (which is like 80-something dollars) combined a length of K type thermocouple which would be surface mounted on top of the firebox. That would give me my alarm functionality at least as long as I was within earshot or eyeshot of the unit itself.

Then I start thinking that it would be cool to measure the stove top as well as the stove pipe and then that would require two of the DP7000s and even then they top out at 999F if I remember right so that probably isn't the ideal range for an alarm for the stove pipe and then we're talking about $200 bucks instead of $100 bucks and I simply start shaking my head at how fast my imagination costs money!

So as you can tell I'm sort of stuck between too little / enough / too much in terms of the options and the prices but I don't currently have anything other than the two ways to measure temps and no alarm.
 
Status
Not open for further replies.