Chain/Bar oil

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
I like this post. All my cutting was finished in December when it was mild out. I wouldn't last long at 10 degrees. Cutting is a 30 degree or warmer activity. I do keep my saw and oil indoors though.


mine too.... although cutting for next year never hurts... i'd rather run a saw in 10 degrees than 95 degrees....

A2D7116D-7309-49C4-B53A-BFFEA1C102CF-1359-000002FD2F93B1F4.jpg
 
I love the 562 , it's pretty strong for 60ccs . But I can't compare it to the 372 ,as its been modded. Just going from memory ,the stock 372 had more power,but not as much as you might think .

how much lighter is it? real world feel? I want one bad after running this 550xp... this muff modded only 550xp is STROOOOOOOONG
 
mine too.... although cutting for next year never hurts... i'd rather run a saw in 10 degrees than 95 degrees....

A2D7116D-7309-49C4-B53A-BFFEA1C102CF-1359-000002FD2F93B1F4.jpg


Looks like you are ready to do battle with any home invaders stupid enough to make their way into your house. This is what America is about
 
how much lighter is it? real world feel? I want one bad after running this 550xp... this muff modded only 550xp is STROOOOOOOONG
Can't honestly say that I've weigh either saw. The 562 is wearing a tech lite bar ,and feels noticeably lighter than the 372.
It's definitely easier on fuel and the back after a few hours of use . But then , I'm on old retired fart,so take that for what it cost ya . :) I'll put it this way, if I had to sell one,it would be the 372 .
 
Can't honestly say that I've weigh either saw. The 562 is wearing a tech lite bar ,and feels noticeably lighter than the 372.
It's definitely easier on fuel and the back after a few hours of use . But then , I'm on old retired fart,so take that for what it cost ya . :) I'll put it this way, if I had to sell one,it would be the 372 .

awesome!, that's what I wanted to hear-quite a bit lighter....that to me is real world weight.... i've got two 372's so i may sell one...
 
  • Like
Reactions: Nixon
yeah me too... My amish stihl dealer told me a few years back the price was going up, so I picked up a case of winter and three regular... i'm down to my last bottle of each. I want to say I paid5 or 6 bucks a gallon. its how much now, 10-12 bucks a gallon? TSC had some on sale for 6 bucks a gallon so I picked up a case of that a couple weeks ago.

So how do you like the 562 compared to the 372? i'm thinking about getting one if I can sell my 084 for a decent price...

I bought about 16 gallons years back when TSC had it on sale for about $2.50/gal............ still have 3 left in the last milk jug crate I was storing them in!
 
I run Canola Oil (Wesson) all year, the consistency stays the same in the summer or winter.
I remember us talking about this last year but forgot to give it a try.......I'll have to pick up a couple bottles at the dollar store and give it a try.....
 
I remember us talking about this last year but forgot to give it a try.......I'll have to pick up a couple bottles at the dollar store and give it a try.....

Me too. I found a really outdated gallon in the back of the pantry that I'd bought for the "fry-daddy" some time ago. I was thinking of just dumping it in my #2 fuel oil tank, cutting with it would definitly be better!
 
  • Like
Reactions: ScotO
I remember us talking about this last year but forgot to give it a try.......I'll have to pick up a couple bottles at the dollar store and give it a try.....

Most fryer oil is canola. Get some changed out oil - settle it for a month and filter through denim.
 
  • Like
Reactions: Boog and ScotO
Zap and Smokinj both had mentioned using it for milling with the chainsaw instead of using bar oil (milling with the chainsaw uses up quite a bit of oil), and they said it works very well. I meant to try it out when we had that discussion, but forgot all about it! I'm definitely gonna try it next time out.

Lee, that's a great idea! I'll get some from my local hot wing haunt up the mountain!
 
Me too. I found a really outdated gallon in the back of the pantry that I'd bought for the "fry-daddy" some time ago. I was thinking of just dumping it in my #2 fuel oil tank, cutting with it would definitly be better!

I checked that oil and no-good, its "Crisco Pure Vegetable Oil", says soybean oil on the label. Problem is is all crystalized up out in the garage sitting next to the still liquid old TSC stuff. If you guys think "soybean oil", is still ok for the saw in warmer temps where its liquid (but not the middle of summer necessarily) I'll still use it. If not, I'll find other uses for it.
 
Status
Not open for further replies.