Stove Glove Fail

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

jatoxico

Minister of Fire
Aug 8, 2011
4,369
Long Island NY
FYI I have a pair of stove gloves like these. The sleeves must be made of polyester or something because I let one touch the glass and it burned/melted onto the glass. The room was pretty dark so I did not see it at first but I smelled something. Most has come off during the burn cycle but it may require a little scrubbing or work with a razor.

 
Why in the heck would they make gloves for a stove out of a poly product? I use welding gloves. made out of thick cowhide, with long gaiters to protect your forearms. Using the same pair I started out with 5 or 6 years ago. I've gone so far as to pick up burning logs and put them in the ash bucket to take them outside (don't ask) before, and never got burnt.
 
  • Like
Reactions: Backwoods Savage
Agreed Scotty!! I also use the welding gloves. And yes they are up to the challenge when one needs to handle flaming wood!! Here's a tip also, always have both gloves on. This will prevent you from grabbing up one of your gloves with a load of wood heading for the stove. Yes I've done this. Glove #2 was never seen again.
 
I tried to look at your picture better to identify the gloves but when I click on them I just get a Hearth,com page with a bunch of info?
 
I tried to look at your picture better to identify the gloves but when I click on them I just get a Hearth,com page with a bunch of info?

Sorry I didn't know it would do that, I just copied a pic off the site. No advert or knock on the gloves really just something I thought I would let folks know.

Scotty and Rich, these were a gift, my next pair will be welders gloves. I pick up burning logs with these too but I can feel the heat so gotta work real quick.
 
  • Like
Reactions: Richprint29
Why in the heck would they make gloves for a stove out of a poly product? I use welding gloves. made out of thick cowhide, with long gaiters to protect your forearms. Using the same pair I started out with 5 or 6 years ago. I've gone so far as to pick up burning logs and put them in the ash bucket to take them outside (don't ask) before, and never got burnt.

I suppose the material in the sleeve offers enough protection for any burning embers encountered in an open fireplace but for the temps stoves are capable of reaching you got to watch. Had them for about 2 years, they're OK. Any recommendations for a decent pair of welding gloves?
 
I suppose the material in the sleeve offers enough protection for any burning embers encountered in an open fireplace but for the temps stoves are capable of reaching you got to watch. Had them for about 2 years, they're OK. Any recommendations for a decent pair of welding gloves?
Best thing to do is go to a local welding supplier, or look online. Get the good, cowhide leather gloves.....lots to choose from out there.
 
  • Like
Reactions: jatoxico
So this is probably not worthy of a great deal of discussion but the gloves are made of;
35% leather
25% flannel (prob lining)
25% Kovanex
15% syn leather

Was the gray (sleeve) part that melted.
 
I suppose the material in the sleeve offers enough protection for any burning embers encountered in an open fireplace but for the temps stoves are capable of reaching you got to watch. Had them for about 2 years, they're OK. Any recommendations for a decent pair of welding gloves?
I got mine at Tractor Supply, they work fine
 
  • Like
Reactions: ScotO and jatoxico
JA, get the to Home Boy Depot or True Value & snag a $10 pair while you shop.

HUGE difference !!!
 
  • Like
Reactions: jatoxico
Right Dixie. We buy the cheap Home Cheapo welding gloves and they work fine. We get maybe 2 years out of a pair and they are less than $10. We're looking to replace our present pair as soon as we have to make a trip to the city. Not looking forward to that though.
 
Agree. I'm also using $10 welding gloves bought last year at a big box retailer. Working just fine.
 
I use these. They are labled Nomax and Kevlar and are pretty much Fire Proof. I have grabbed flaming logs and glowing coals with no problem or any sign of burn at all. I am also a welder and blacksmith and have plenty of welding gloves but find these better for the stove. Less bulky and = or better protection with no burning at all. They are also rather cheap and in the $10 range. Just another option. Oh, you can also throw them in the laundry if clean gloves are your thing. DSCF9819.JPG
 

Attachments

  • DSCF9818.JPG
    DSCF9818.JPG
    249.4 KB · Views: 158
  • Like
Reactions: jatoxico
Kinda disappointing, but good thing you were wearing the gloves!_g
I went a season without stove gloves and have the scars to prove it. Then went another season where I wouldn't alway use them, and have the scars to prove that too. Slow learner, or just stubborn I guess. I have some cheapo welding gloves bought online & they are going on year 4 I think, good as new (well, not as pretty anymore). Longer is better. No new scars here in the last couple years, but my wife got one near her elbow from the handle retaining nut.
 
Status
Not open for further replies.