When you say "small fan"... (moving hot air)
- Thread starter Bster13
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Huntindog1
Minister of Fire
They make those little high velocity fans than when they run on low you can even hear them hardly. Mine are 9 inch size but they make 6", 7" and also 12" versions.
http://www.walmart.com/ip/Massey-9-...der-Coated-in-Silver-Color-Stock-MF-9/9219112
I will go look for a pic.
http://www.walmart.com/ip/Massey-9-...der-Coated-in-Silver-Color-Stock-MF-9/9219112
I will go look for a pic.
Backwoods Savage
Minister of Fire
Dix
Minister of Fire
I have a $3 clearance at Wally World, bought 3 years ago.
I'm gonna miss it when it goes *sniff*
2 speeds, flexible on angle and oscillating.Think your basic table fan, 6" s wide.
I'm gonna miss it when it goes *sniff*
2 speeds, flexible on angle and oscillating.Think your basic table fan, 6" s wide.
Hearth Mistress
Minister of Fire
This fan, I mean, "whole room circulator" changed our lives, $40 but keeps the house even temp. See the thread below - someone posted a video too about these fans. They are a bit pricey but in my old drafty barn, it's made a huge difference.
https://www.hearth.com/talk/threads/10-degrees-and-cant-keep-up.104297/#post-1350640
Especially since our back up oil furnace has "red light syndrome" today so it isn't running. I took the filter out, blew back the lines, checked nozzle but it's got to be the sensor. It fires up but won't stay on. There is a celluloid sensor that "sees" the fire but I don't remember where it is to clean so the safety kicks it off. I think it heard me schedule the annual PM for monday and is just mocking me
I'm now sleeping on my sofa to keep the fire going. Woke up this AM to 58 upstairs, 52 in living room and 40 in my kitchen. Took me all day to get us at 70 and I don't want to start over tomorrow, well later this morning! Glad I have the stove though, even with the maintenance contract, it always costs me over $200, so it can wait until Monday.
https://www.hearth.com/talk/threads/10-degrees-and-cant-keep-up.104297/#post-1350640
Especially since our back up oil furnace has "red light syndrome" today so it isn't running. I took the filter out, blew back the lines, checked nozzle but it's got to be the sensor. It fires up but won't stay on. There is a celluloid sensor that "sees" the fire but I don't remember where it is to clean so the safety kicks it off. I think it heard me schedule the annual PM for monday and is just mocking me
I'm now sleeping on my sofa to keep the fire going. Woke up this AM to 58 upstairs, 52 in living room and 40 in my kitchen. Took me all day to get us at 70 and I don't want to start over tomorrow, well later this morning! Glad I have the stove though, even with the maintenance contract, it always costs me over $200, so it can wait until Monday.
WES999
Minister of Fire
There is a celluloid sensor that "sees" the fire but I don't remember where it is to clean so the safety kicks it off. I think it heard me schedule the annual PM for Monday and is just mocking me
I think you mean CAD cell, if you search youtube you will find some vids showing how they work and how to clean them. It is usually a simple job to do.
Matt Ruggeri
New Member
We just had to do the same thing on out Oil Burner, and the "Cat Eye" was just replaced. Figures, only the 3rd time we've reached for the Thermostat all winter. We lost a day of heating yesterday, contractors were working on the house with the garage doors wide open all day. Ours is a small 1850Sq ft (only 1/2 of this is finished) "Beach" house, stove in the basement/on-grade Living Rm, over 1/2 of that space is unheated, unfinished Garage.
We use the same Fans, usually on the floor pointing out if we need to heat a room quickly! There's also one above the stove. Helps to push the heat up the open staircase/hallway. Sounds crazy but it works, and it's taken me all winter to find the right places without interrupting the natural convection and flow in the house. Other than that just some small DC Powered fans in the doorways. They're Panaflo 115CFM fans, I have no idea where they came from! I know it looks 'hack' but it was way cheaper than those corner doorway fans. all through the cold snap we were at a steady 74 day/night and around 65 in the AM.
We use the same Fans, usually on the floor pointing out if we need to heat a room quickly! There's also one above the stove. Helps to push the heat up the open staircase/hallway. Sounds crazy but it works, and it's taken me all winter to find the right places without interrupting the natural convection and flow in the house. Other than that just some small DC Powered fans in the doorways. They're Panaflo 115CFM fans, I have no idea where they came from! I know it looks 'hack' but it was way cheaper than those corner doorway fans. all through the cold snap we were at a steady 74 day/night and around 65 in the AM.
10" fan. I needed a new one about a month ago. Drove all over town looking for a fan. Had to order one on line. I keep it on low
Matt Ruggeri
New Member
'Tis the season!
I always buy a few in the fall when they go on clearance. My wife is one of those "need the loudest man-made fan on high to sleep", then she forgets to turn it off.. Needless to say, we burn out at least one a year.
NH_Wood
Minister of Fire
I use three of these - two downstairs and one upstairs - but I remember only paying about $11/each from Amazon two years ago. Cheers!
http://www.amazon.com/Lasko-Persona...ie=UTF8&qid=1359210171&sr=8-45&keywords=lasko
http://www.amazon.com/Lasko-Persona...ie=UTF8&qid=1359210171&sr=8-45&keywords=lasko
I use a small box fan. It's only 2 ft by 2 ft. I think I paid around $14 at Walmart for it. for a blower I picked up a $10 computer fan at Radio Shack. Its 3" square. If you look for this, make sure you get a 120 volt version and not a 12 volt version.
Matt
Matt
Hearth Mistress
Minister of Fire
Yes, cad, not celluloid. I just couldn't remember how to get to it. woodgeek told me so I'm off to give it a shot.
10-12" desk fan running on low speed is what I often say. The bigger blades move a fair amount of air on low speed and yet are very quiet. There are also floor fans like the Stanley/Lasko unit that work well. In a pinch a small box fan will also work.
You will often get better results moving cold air, down low, blowing toward the stove room.
http://www.amazon.com/Stanley-High-Velocity-Blower-Fan-655702/dp/B0001BJDUQ
Hearth Mistress
Minister of Fire
That was it, that was my exact Carlin piece too in the video. 2 q-tips saved me a $150 service call. I will have the "proffesional" look at it Monday when they come out for the PM. THANK YOU
bluedogz
Minister of Fire
I use this one: http://www.laskoproducts.com/48-xtra-air-tower-fan-with-ionizer-model-t48300/
Quiet enough that on speed 1 out of 3, I can't hear it standing next to it.
Quiet enough that on speed 1 out of 3, I can't hear it standing next to it.
Backwoods Savage
Minister of Fire
This fan, I mean, "whole room circulator" changed our lives, $40 but keeps the house even temp. See the thread below - someone posted a video too about these fans. They are a bit pricey but in my old drafty barn, it's made a huge difference.
https://www.hearth.com/talk/threads/10-degrees-and-cant-keep-up.104297/#post-1350640
Especially since our back up oil furnace has "red light syndrome" today so it isn't running. I took the filter out, blew back the lines, checked nozzle but it's got to be the sensor. It fires up but won't stay on. There is a celluloid sensor that "sees" the fire but I don't remember where it is to clean so the safety kicks it off. I think it heard me schedule the annual PM for monday and is just mocking me
I'm now sleeping on my sofa to keep the fire going. Woke up this AM to 58 upstairs, 52 in living room and 40 in my kitchen. Took me all day to get us at 70 and I don't want to start over tomorrow, well later this morning! Glad I have the stove though, even with the maintenance contract, it always costs me over $200, so it can wait until Monday.
View attachment 90975
That is the same fan we have. We also have a bigger one we use in summer.
Huntindog1
Minister of Fire
Dont forget also that keeping the humidity up will make your house easier to heat also.
Backwoods Savage
Minister of Fire
Most definitely. My wife refuses to use the dryer. She simply hangs clothes near the stove and we also have a ceiling fan not far from the stove. On days she does laundry I usually try to be busy outdoors because she likes to keep the temperature up to help dry things faster. Our normal temperature gets a bit uncomfortable.
My BK insert will have a blower (standard I think), and I was thinking I need fans on top of that. Just started a thread with a new video:
https://www.hearth.com/talk/threads/a-man-a-fan-and-a-plan-moving-heat-video.104663/
https://www.hearth.com/talk/threads/a-man-a-fan-and-a-plan-moving-heat-video.104663/
After returning two obnoxiously loud fans, I took the blower from my old slammer, mounted it on a steel plate and painted it. Virtually silent at low speeds. Looks a bit too industrial for my wife's liking, but I don't get to build much anymore, so I'm keeping it.
TE
TE
- Status
Similar threads
