Sooteater on sale!

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

EatenByLimestone

Moderator
Staff member
Amazon has it for $42. I needed enough to reach to the top of a 25 foot chimney. When comparing the price of extra rods, it was only $2 more expensive to buy a 2nd Sooteater. I now have 2 on the way.

Yea me!

Matt
 
I did the same thing, with a 28' chimney, and it worked like a charm. I think it would go up 100' if you needed it to. Just drape your insert and withdraw it with a wet rag to clean the rods on the way out. I never have to go up on ladder again. Woohoo!
 
whats the regular price? that seems pretty pricey too.
 
Amazon used to have them listed at around $45. The price dropped to $42 about a month ago while it was in my wish list and I received an e-mail. Like the OP, I bought two sets of them because I have close to a 30' chimney. Have yet to try the thing out, but have picked up a ton of tips from this site regarding how to use it without making a huge mess.
 
What are you buying. I see a kit but I haven't seen where it says what length this thing is. I also see another kit for arounf &5 that has all kinds of "stuff" with it, bo no length. I need about 25 ft.
 
The Sooteater RCH205 Rotary Chimney Cleaning System cleans wood stove and fireplace flues. Spinning chimney whip removes dangerous soot and creosote buildup better than a brush. Helps prevent flue fires. Unique trim to fit design fits multiple flue sizes. Will work on round from 5 to 18-Inch in diameter; 12=Inch x 12-Inch square, rectangle or oval flues up to 8-Inch x 12-Inch. Won't scratch metal flues like a steel brush. Fits through tight areas. Fits on any drill and spins forward and reverse. Cleans from the bottom up without getting on a ladder so you can DIY and save money. Includes (6) 3-Feet long flexible rods with reversible bottom link quick connect system.



The regular kit includes 18 feet of rods. You can buy 6 ft for $20. You'd need 2 kits so you might as well spend $2 extra and get a replacement head.

Matt
 
Thanks Matt! I'll place the order as quick as I get off here!:)
 
Thanks for posting, Ive wanted one of these for a while.
 
One of the two came 2 days ago. I wish the other would make it here so I could do th chimney.

Getting the lower half really won't get me too far.
 
Dumb question alert
so how do you think this would work on a 8" single wall stovepipe with 3/90's & a gob of sheet metal screws protruding inside _g
 
That's not a dumb question. For singlewall, I'd adjust get a brush and a single length rod. I'd brush it the old way. This is what I've always done with my 6" singlewall.

Matt
 
That's not a dumb question. For singlewall, I'd adjust get a brush and a single length rod. I'd brush it the old way. This is what I've always done with my 6" singlewall.

Matt
through three 90 deg. bends & 30 screws ?. ( currently disassemble into 3 pcs for cleaning)
 
through three 90 deg. bends & 30 screws ?. ( currently disassemble into 3 pcs for cleaning)

concerned about weed whip lines getting chopped off on screws & question being able to make the bends
 
I'd disassemble it. Screws aren't hard to put back in. I use the self drilling ones.


Matt


Thanks I figured it would not work for me .
Taking this apart is easy
Reassembly is a pain , & I use self tapping screws but don't really see the reason as the holes are already there. 18 holes to match up even with marking them it is a struggle to get back together .
You see this stove has no baffle . I was thinking open stove door & it's a straight shot to the rear flue outlet take soot eater and go right in up over thru to chimney. No dissamblely required. Ha what was I thinking
Cheers
 
Sale still going
 
Status
Not open for further replies.