overfire !!

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
If you have small enough hands you can reach the pins by going in through the stove top. Try to visualize the pins as being centered at the top of the rear corner stones. If you can reach in to the left and right of the cat cover you can likely place a dab of furnace cement on the pins to block them. My hands don't fit :( but a colleague's did:)

So are the holes/what you want to plug pointing up to the ceiling or out toward the front of the stove?
 
So are the holes/what you want to plug pointing up to the ceiling or out toward the front of the stove?

The roll pin is hollow,
From Doug60's pics:
rollpin_zps6a9b5412.jpg
 
Status
Not open for further replies.