need help .... which manufacturer and model could be this oven?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
Hi,
catch for little money this oven...​
insert-oven02.jpg
insert-oven08.jpg
insert-oven07.jpg
insert-oven06.jpg
insert-oven05.jpg
insert-oven04.jpg
insert-oven03.jpg

I don't know the first thing about it.
looking for manual etc
must be some years old

make a first fast clean job on it and must bypass the vacuum switch (clean the tube and the hole to the exhaust pipe)
the last owen bypass the blower switch. will see what my meter say ...

a first test run show up
hot airflow feels poor

i think he was running on blower 100% and feeder on a middle to high position.
garage (35x15food no isulation) holds on 60F outside 36F

maybe will make a good 2. stove for the rest from the house..

thx for any help on it
 
It says right on it. It's an Enviro EF II (two).

It's an insert model. Not freestanding.

They were known as a good stove. Clean it well. Compressed air, lube motors, and check gaskets.
 
A very good stove, EF2I parts are readily available, simple to use and maintain. Rated at 35K btu good for about 1200-1500 sqft here in Ct.
 
hi,

sounds good for us very thx for your help,
well see what we do with the insert, maybe give him a good cleanup and some paint sell him and buy a 2. free stand one.

fred
 
hi don,

pls the vacuum hose on the top (low) connection or in the down (high) one ??

maybe need some parts later ..

thx
fred
 
hi don,

pls the vacuum hose on the top (low) connection or in the down (high) one ??

maybe need some parts later ..

thx
fred

Most of the pellet stoves use the top low connection.
 
it could also stand for "itchy"....but I'm gonna agree with Scott on this one.;)
 
The "i" in EF2i stands for insert, not ignition.

Hey Scott, You need to study your stoves a little more. If you have any questions let me know.

I rebuild stoves not just fix them!

FPI = Fire Place Insert

Enviro EF-2 FS = NO ignitor
Enviro EF-2i FS does mean Ignitor! ! !

See my red and blue arrows in the Enviro Info below.

Click to enlarge.
 

Attachments

  • EnviroEF2iFS.jpg
    EnviroEF2iFS.jpg
    146.1 KB · Views: 115
They also make the EF3bi which stands for "built in" which was the first and one of the few which are approved for zero clearance

No Scott, the EF-3Bi FS stands for Bay View ! ! ! LOL

Also it is not zero clearance without the optional zero clearance kit
OPTIONS
  • 24Kt gold door cover.
  • Nickel door cover.
  • Zero clearance kit.
 
holy *&^%, Don was right....I shall mark the day.;)
 
  • Like
Reactions: DexterDay
It helps not only to RTFM but also Read The Sales brochure. Since I am a dealer I tend to do that. LOL
 
I think around of beers is needed for this posting lets all drink a look at the ladies
 
Status
Not open for further replies.