Breaking in an Oslo

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

Kitchen

Member
Jan 20, 2013
41
Shawangunk Mountains, NYS
Cold enough (40s) tonight to light my break-in fire for the new Oslo. I understand that you need 3 fires - 200 - room temp - 300 - room temp - 400 - room temp. Does the last break-in fire (400) need to be done right after the second one or can I wait until tomorrow to do the last fire. Or do they all need to be done consecutively. Inquiring minds want to know.......
 
When I broke in my Castine 12 years ago I did 3 consecutive fires . I believe the manual will confirm that method.
 
It won't hurt anything if you wait a few days before the last fire. If you didn't do it till the fall you might do a little extra just to be safe.
 
When I recently did my break in burns with my new F600, which is a porcelain finish, I noticed the stove kept giving off smells each time I fired it a little hotter than the time before. It took several burns between 450F and 500F to finally get all the off gasses burned off.
 
When I burned off my 7100. I did it in 3 fires, each progressively hotter. No sure what the reprocusions are if you started with a hot fire, other than a lot of nasty gases all at once.
 
Woodstock says to let the stove cool completely to room temp before the next break-in firing, and so does Jotul. When all else fails, read the manual. ;lol
And I think that's stove top temp, not room temp. !!!
 
Woodstock says to let the stove cool completely to room temp before the next break-in firing, and so does Jotul. When all else fails, read the manual. ;lol
And I think that's stove top temp, not room temp. !!!


Thanks everyone for the info. I did the three burns, following the manual and am now sitting in a toasty living room while it is 40 degrees outside tonight. BTW - I got very little gas odor with the Oslo's Blue/Black enamel.
 
Glad it went well. Post a pic of that beauty. Kitchen is your avatar a picture of your land?
 
now sitting in a toasty living room while it is 40 degrees outside tonight. BTW - I got very little gas odor with the Oslo's Blue/Black enamel.
Nice to be able to finally sit back, enjoy the results of your work, and soak up some heat on a cool night. :) It didn't get into the 40s here tonight but I fired up the previous two nights.
The blue/black finish is gorgeous! :cool:
 
Glad it went well. Post a pic of that beauty. Kitchen is your avatar a picture of your land?


Avatar is a picture of the Catskills Mountains from a farm down the road from me. I have the same view, minus the barn.

IMG_2278.JPG
 
Great looking stove! Fantastic view, as well. Thanks for sharing.
 
40F at the end of May, what wacky weather we have. As you've noticed, the enameled Jotuls don't emit a lot of smell when breaking in. That smell is mostly with painted stoves. The paint outgases as it bakes in.

You're going to love the blue-black enamel. It keeps looking sharp year after year with just a quick towel wipe. Enjoy the new stove! It's a beauty.
 
  • Like
Reactions: Kitchen
I can't quite see the stove top meter but I'm thinking you could probably run a bit hotter than that. ;)
 
40F at the end of May.
And of course as mother nature would have it, 70's & 80's to immediately follow.
I burned last weekend, we had the low 40's too. This Friday the central A/C may grace us.
 
Status
Not open for further replies.