Looking for a vintage lawn tractor.

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
Yes! Is it a first gen 316? (Kohler single) or the later Onan twin powered machine?
didnt one of those first gen 316's or 317's get a bad rap for engine issues? something about kohler not designing the oiling correct
 
I think the kohler 17hp got the bad rep (2 cylinder). The 10-16hp single lung K series Kohlers are pretty tough.
 
Nothing wrong with the old Deere's, but 1960's Cubs and even the old Bolens have so much more... panache.

Do note, you should be searching on the term "garden tractor", not "lawn tractor", if your intent is plowing or tilling.
 
  • Like
Reactions: smokinj
Nothing wrong with the old Deere's, but 1960's Cubs and even the old Bolens have so much more... panache.

Do note, you should be searching on the term "garden tractor", not "lawn tractor", if your intent is plowing or tilling.

Yea but most people list there both ways. Seems they don't know....
 
These old Cub Cadets are classics.


DSC02300.jpg
 
  • Like
Reactions: smokinj
What model?


Narrow frame, original style seat, optional round fenders... likely a model 100. A very early Cub.

I had a 123 hydro, which was a serious, mean little machine.
 
  • Like
Reactions: smokinj
Narrow frame, original style seat, optional round fenders... likely a model 100. A very early Cub.

I had a 123 hydro, which was a serious, mean little machine.
I misunderstood. Yes, this one is a 100. I just found this on another forum. I once saw a pic of one hauling an unbelievable load of hay on some forum, but I can't find it now.
 
  • Like
Reactions: smokinj
I am looking at a 108 cub
 
Those are all good machines. A 12x would be even better.

The quick course:

7x = 7 hp
10x = 10 hp
12x = 12 hp
14x = 14 hp
etc.

The 7x's are very cool, but seriously lacking in power and weight. The 10x's will do most of what you need. I think all 7x, 10x, and 12x tractors are narrow frame, and they introduced the wide frame with the 14x, but don't quote me on that. The narrow frames are very collectible, and serious workhorses, but the implements are more difficult to change out. They introduced a quick change system with the wide frame.


I misunderstood. Yes, this one is a 100. I just found this on another forum. I once saw a pic of one hauling an unbelievable load of hay on some forum, but I can't find it now.

Nothing misunderstood. The 100 is a cool machine! I wish I had space to have one.
 
  • Like
Reactions: smokinj
If you're looking for a working machine, consider the following.

The aftermarket and enthusiast communities are what keep these machines alive. It's one thing to collect classic machinery, restore it and run it from time to time. It's quite another to need it to perform reliably in the present day.

Out of all the companies that built fantastic garden tractors, there are only two or three left. One has forever been playing catch-up, the other is a retail bean-counter whose product is a shadow of it's ancestors. (And that is stretching it a bit IMO) The final survivor, you can still walk up to the parts counter, state what you need and there is more than a passing chance that they will have it or it can be had in one to two days. It's the same company that has an aftermarket and enthusiast following that is second to none.
 
If you're looking for a working machine, consider the following.

The aftermarket and enthusiast communities are what keep these machines alive. It's one thing to collect classic machinery, restore it and run it from time to time. It's quite another to need it to perform reliably in the present day.

Out of all the companies that built fantastic garden tractors, there are only two or three left. One has forever been playing catch-up, the other is a retail bean-counter whose product is a shadow of it's ancestors. (And that is stretching it a bit IMO) The final survivor, you can still walk up to the parts counter, state what you need and there is more than a passing chance that they will have it or it can be had in one to two days. It's the same company that has an aftermarket and enthusiast following that is second to none.


Truth. If you're actively using a 30 year old machine, it's gonna break. Repairs are a lot easier when you can easily find parts.
 
That's why I sold my 123. Got tired of fixing it. Never anything major... just endless little things. I was putting a LOT of hours on it, though.

... a LOT of hours. <>
 
Truth. If you're actively using a 30 year old machine, it's gonna break. Repairs are a lot easier when you can easily find parts.
30? He's looking for at least 40 yrs old. I use a 30 yr old machine for my routine work around here. I never thought it was vintage.
 
  • Like
Reactions: smokinj
I have a JD-110, the weakest link in the older JDs is the Variator clutch system. Its a variable sheave system. Mine is currently at the dealer being rebuilt. Nice thing is that you go to the parts counter, and what you need is there the next day. Or, if you don't have time to do the job yourself, you can drop off a 40 YO garden tractor and they still have techs who can fix them. Try doing that with any other make.

Currently, I have been using my 1947 Gravely L for just about everything other than field tillage. They are still cheap, so you can buy a few for parts (I have 3 parts units and 2 runners). Like a horse though, you have to like working with them, because they always want to try to hurt, injure or maim you when you least expect it...
 
  • Like
Reactions: smokinj
30? He's looking for at least 40 yrs old. I use a 30 yr old machine for my routine work around here. I never thought it was vintage.

Yeah, the "new" tractor that replaced my 48 year old Cub is a 27 year old Deere. Both are old, but there's a huge difference in technology and reliability. That said, the Cub could often be repaired with parts from Walmart or Napa... the newer Deere is more modular, always requires special parts from Deere.

PS - if anyone is looking for a good running Kohler K301, I have one I want to sell. Came out of a Deere, I bought it as a spare for my Cub. Both used the same 12hp engine, with different shrouds, etc.
 
  • Like
Reactions: smokinj
http://terrehaute.craigslist.org/grd/3855321913.html

Unload the Deere and put some money in your pocket after buying something like this.

Funny you posted that Looks like my new tractor will be in the form of a Cub cadet 108. 3 point hitch. Its only a 10hp but it should do what I want. Plus its still got the working belly deck. Oh and yes I will be throwing quite a bit of cash in my pocket. ;) I am only looking for light duty plowing and light duty mowing. We are talking maybe and average of 2hrs a week tops. I can get part new on the net. I do that a lot with the jds if I a few day anyways. With have 2 it will be a done issue waiting.
 
  • Like
Reactions: Ashful
my 40 year old 110 mows 1 acre weekly reliably - no issues on parts availability, as far as I have read the engineers at JD designed the original 110 with the intention of it being able to pull a 1 bottom plow

 
  • Like
Reactions: smokinj
JimDandy04162004 017.jpgJimDandy04162004 001.jpgBillsPowerKing070502_03.jpg Economy Power King and Jim Dandy. Lotsa fun!
 
  • Like
Reactions: smokinj
cub cadet.jpg




Looks like its going to be a 108 cub cadet. Will be here 5:00 Tuesday!
 
Status
Not open for further replies.