1st chainsaw (sort of) -What do you think?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
Saw lowes was giving a free case and qt can of the husky premix 50:1 E free fuel.
 
  • Like
Reactions: BillLion
Saw lowes was giving a free case and qt can of the husky premix 50:1 E free fuel.

That case is great. I've bought 2 of 'em on my own dime. $50 a piece!!! Take the free one.
 
  • Like
Reactions: BillLion
Have had my 435 for probably about 3 years now. Love it, no problems, Love the antivibration stuff they design into it. Like holding a little dirt bike motor in your hands.
As I recall the warranty requires ethanol free fuel. I've been burning ethanol free in mine since new. It's good on gas. Good deal for the money I think.
In the US that would be tough to enforce as most areas have ethanol blended into the fuel. Ethanol itself isn't what kills the saw, but that's a discussion for another thread.

In addition to the excellent advice regarding wearing appropriate protection.....

My advice to the OP is to learn to sharpen your own chain. Both Stihl and Husqvarna have great videos on how to hand file chain. A well sharpened chain will avoid many, many issues new saw owners face.
 
Wow, thank you guys so much for all of the tips! I recently joined and spend most time in the wood shed forums learning there. But coming over here has been extremely helpful, so I really appreciate all the advice and encouragement. A recurring theme seems to be I need to get ear protection. I had figured since all the heavy metal I listened to growing up didn't blow out my ear drums, that the "heavy metal" tool wouldn't bother me. !!! Guess it's time to rethink that!

So far, I love the chainsaw -as a non-pro "backyard lumberjack" it's perfect for my purposes.
 
How do you know the Heavy Metal didn't effect your hearing?? What? Huh? Come again? Just kidding - but the reality is once the hearing is damaged it does not regenerate like a good aspen grove no matter how well you protect what is left. We are all aging and our hearing, sight, and other abilities diminish over time - do your best to make that a "long time!!"
 
  • Like
Reactions: BillLion
Congrats on completing step one in the order of becoming a CAD member. (chainsaw aquisition disease).
 
Wow, thank you guys so much for all of the tips! I recently joined and spend most time in the wood shed forums learning there. But coming over here has been extremely helpful, so I really appreciate all the advice and encouragement. A recurring theme seems to be I need to get ear protection. I had figured since all the heavy metal I listened to growing up didn't blow out my ear drums, that the "heavy metal" tool wouldn't bother me. !!! Guess it's time to rethink that!

So far, I love the chainsaw -as a non-pro "backyard lumberjack" it's perfect for my purposes.
If you run the saw 15 mins without ears on one day and then running it the next with them. The difference after is amazing. You don't think they ring after running it as its so mild but when you have used ear muffs the difference is instantly noticeable when u take them off.
 
  • Like
Reactions: BillLion
Never cut with the bar in line with any body parts in case of the bar kicking back at you, like your shoulders , face etc. Wrap your thumb around the top bar as well, just don't hold the bar! Have fun!
 
I ran out on my lunch break and picked up some pallets to stack my wood on and these:

photo.JPG

Probably not a permanent solution, but should work for now!
 
That's as good as anything, well most.

I just use the cheap HF muffs that go on sale for like $2.
 
  • Like
Reactions: BillLion
In the US that would be tough to enforce as most areas have ethanol blended into the fuel. Ethanol itself isn't what kills the saw, but that's a discussion for another thread.

In addition to the excellent advice regarding wearing appropriate protection.....

My advice to the OP is to learn to sharpen your own chain. Both Stihl and Husqvarna have great videos on how to hand file chain. A well sharpened chain will avoid many, many issues new saw owners face.


Very complicated video.
 
  • Like
Reactions: BillLion
I normally wear corded washable earplugs,but always have a handful of the disposable foam corded ones grabbed from jobsite trailer as backup.Plus regular earmuffs when working in the shop/around the house & other times when not needing a hardhat. I know one thing - if I hadn't started wearing ear protection in my 20's,my hearing would be gone now.
 
LOL, like a foreign language. I can't stand to hear a factory saw "whine" through the choked up exhaust.
So , does a muf mod help on these engines ,like my Husky 445 ?
 
  • Like
Reactions: clemsonfor
So , does a muf mod help on these engines ,like my Husky 445 ?
I'm sure it would. I have a 445 I need to mod once I get time and my carb tool! Its my new to me limbing saw. Much ligjer than the 64cc and the 71cc. But I can't stand to wait on that thong cutting wood.
 
I'm sure it would. I have a 445 I need to mod once I get time and my carb tool! Its my new to me limbing saw. Much ligjer than the 64cc and the 71cc. But I can't stand to wait on that thong cutting wood.
My 61 had problems a couple if times while out cutting so ,I had to finish with the 445 it was slower but got it done , if I can make it better I'll do it but, I don't know much about doing mods .
 
Status
Not open for further replies.