Garden / firewood cart tires keep going flat

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

wahoowad

Minister of Fire
Dec 19, 2005
1,669
Virginia
I know quite a few of us use this garden cart to haul their firewood around. Mine has been a work-horse and taken a lot of abuse but still keeps rolling along.

The tires have finally dry-rotted and go flat quickly when I add air. I've seen replacements at Lowes but 4 new ones would cost around $75 (they come complete with the rim/bearing assembly) which is more than half the cost of buying a whole new cart.

Has anybody replaced their tires/wheels and recommend what you bought? I see some "flatfree" styles at Harbor Freight but always hesitant as to quality when I order from them

cartz_zpsb2312306.jpg
 
oops - meant to add mine are 13x5x6 and I think keeping the 5" width important since the cart can sink into my yard unless it is bone dry. The flatfree at Harbor Freight is only 4"

9C1D8CB6-D329-4022-A95F-3EAEC97C100C-13617-00000C09FE1656E6_zpseda4a636.jpg
 
Last edited:
Erik is correct. I have done the same with a 2 wheel dolly, with similar size tires, and a wheel blower. I think the inner tubes cost me about $8-$10 per tire installed. Check with your local, or maybe not so local, lawn and outdoor power equipment dealer that has a repair shop. My tires are still flat free to this day and they were done about 4-5 years ago. Great way to extend the life of tires. Obviously you will eventually have to replace them. Good luck!
 
I replace tubes in tires like that all the time. Just split the rims, cut the old valve off with a sidecutter and slap a tube in it. You'll get alot more years outta them tires.
 
I replace tubes in tires like that all the time. Just split the rims, cut the old valve off with a sidecutter and slap a tube in it. You'll get alot more years outta them tires.

Gotta agree with Butcher. Tube them tires - they have many miles left to give.
 
I bought 4 tubes. Turns out the original tires had tubes in them too. The tubes had small scratches along the sides that made me think a steel belt had scratched them, but this is a bias ply tire so no steel belt to abrade it. I think the cracks in the sidewall of the tire allowed the tube to recess in them a bit,...that or the sidewall cracks simply abraded the tube. I suspect the new tubes will get abraded over time too.

I bought bent stem tubes and needed straight stem :(
 
Status
Not open for further replies.