Arrow stoves, any good?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

fespo

Minister of Fire
Dec 14, 2005
730
South West burbs of Chicago
Good morning everyone, me and my C L searches. I found a Arrow brand wood stove on C L list but I can't find a whole lot of info on line about them. They were made by Heatilator, but no other info. I one I found does have burn tubes, some black pipe and 2-3 pieces of S S flue for $2oo. Any info on this stove would be great. Thanks Frank
 
Is this an older stove, no glass in the door or perhaps a cabinet heater?
 
DSCF9712.JPG DSCF9713.JPG
Here are a few pictures
 
Last edited by a moderator:
Not in bad shape at all. It's EPA or at least close to it.....
"Arrow was started in Tualatin, Oregon in the late 1970's by Joe Chamberlain, an entrepreneur, as part of a general sheet metal fabrication business. Arrow was the first steel wood stove designed with a pedestal instead of legs, and also pioneered the use of a gold finish on the stove door. Chamberlain sold the Arrow business to Heatilator/HON INDUSTRIES in 1985 just as state and national air quality regulations were starting to impact the industry. As a result of these regulations, the Arrow business declined and Heatilator closed the Tualatin factory and moved manufacturing to Mt. Pleasant, Iowa in 1989. Several attempts to regain its once strong market position by selling through the Heatilator fireplace sales force and customer base were unsuccessful. In 1993 the company hired Mike Derosier, an experienced stove industry sales and marketing executive, to direct the Arrow stove business. In the fall of 1993 Arrow launched an innovative direct vent gas stove which started a new industry trend and helped revive Arrow sales and market share."
 
I don't find any listing for it but that sure does look like a contemporary design. For $200 is sounds like it could be a good buy.
 
Well I did buy it. It was made in 96 so says the sticker on the back. Here are some pictures of the package deal. I did clean up the brass door myself and pulled the old gaskets and glass.
DSCN0346.JPG DSCN0347[1].JPG DSCN0348[1].JPG DSCN0349[1].JPG DSCN0351[1].JPG
I don't think they use it much because of the set-up they had. Magic Heat Reclaimer, leaking gaskets, single wall inside flue that had leaking creosote dripping down and total short length flue.
 
Last edited:
Looks pretty nice and a good deal. Sell the Magic Heat and pocket the change.
 
Ok, Arrow is installed in the green house. Installed new gaskets, double wall up threw the roof,(I cut the plastic polycarbonate and used sheet metal in it place. Now, I know this is not right, but I used what I had. Double wall all the way up and out. ya ya ya I know!!!!! But it is a 10x12 Harbor Freight green house, away from my house. I did sell the magic heat on e-bay for $112.50, now I have to dump 2 pieces of SS flue. I don't know what kind it is, but it is some very heavy pipe. Those burn tubes are going stongDSCN0383.JPG
 
Be careful with that stove in such a small place. You may end up with baked petunias.
 
Im having a hard time right now keeping it warm, the space heater does kick on/off . This cheapie green house is very very drafty. I am working on sealing it up as best as I can.
 
Arrow is out!! Great LITTLE stove, just to small for over night burns in a cold green house. I replace it with a brand new Pleasant Hearth stove. Price was right just a three half hour drive each way.
 
Heating one of those green houses over night in chi town is gonna be a chore.
Neat set up.
 
I like the greenhouse, but as Oldspark says, it's gonna be a chore...
 
Thank you
I used the exact same stove as you have pictures, complete even with the side protectors. We used it pretty much exclusively for 13 years to heat a VERY drafty old 1,400 sq ft farmhouse in North Texas. Great stove. Simple, easy to clean, easy to operate, non-catalyst, and I could pretty easily get a good overnight burn every night for an easy restart the next morning. At one point, I remember my wife remarking that we had the stove going continuously for over a month without a full cool down. Anyway, I wish I could help you with the rear label question. Can't help you there, but enjoy that stove. It's a classic!
 
Kind of curious if you have a photo of the label on the back of the stove. I have the same one!! Ex-husband painted over the label and i need info on the stove.
Thank you.
I've got the same stove , but in insert form. Came with my '72 house I purchased in '04. Haven't had it out yet. I'll get a shot when that happens.
 
Status
Not open for further replies.