Help Identifying my first wood burner

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

KDMANN

Member
Nov 6, 2013
32
West Michigan
So after 10 years of marriage my loving wife and I bought our first home. Pretty exciting ! I've never owned or used a wood stove but guess what the home came with..ha,ha...So It seems to work ok , although I have no idea what kind it is. I understand the basics so far. It has a blower on the back that pushes the warm air thru 4 big tubes. The tubes actually go thru the fire. On the right side it has a control nob. It has a spring that attaches to a chain and runs the air-in flap thats on the bottom front. No ash pan . Here's a couple pics...maybe somebody can help out this newbie. Thanks!
 

Attachments

  • S5030265.JPG
    S5030265.JPG
    101.6 KB · Views: 1,995
  • S5030266.JPG
    S5030266.JPG
    100.1 KB · Views: 1,567
You can tell I'm new. LOL , I have to work on down sizing pics , sorry.
 
Nice ID Craig! Aunt Sarah looks like she belongs on Red Dwarf.
 
Cool Looking Wood Stove1
 
Wow ! Actual literature on my stove too . I'm very grateful. Thank You ! We were on our break at work today and it was pretty quiet....nobody had anything to say...So I say...My aunt sarah is smokin hot. She's in pretty good shape for her age. Last night she sure did keep me warm...LOL You should have seen the looks I got ! Then I told them the name of my wood stove..LOL . That definately broke up the silence with laughter.
 
Thanks so much webbie ! I've had no problems with aunt sarah so far....she's been going non stop and really keeps our home warm. I've been using the grate to put the wood on...but I see the ad says it's a coal grate. Thats kind of funny because I have 3 large tubs of this black stuff (coal) that was left in the garage when we bought this place.Now I have to ask another dumb question.....how do I burn coal?? Should I burn coal?? I'm very happy burning wood...but now I'm curious..LOL.
 
No Coal...sounds good to me..thanks ! Whats your thoughts on the grate. It's cast iron and has like 2 inch feet on the four corners. I thought I was supposed to use it..LOL.
 
So this evening I cleaned the ashes out and took the grate out too. To my surprise it lit very quick and got up to temp faster without the grate. Geesh , I'm an idiot. Supposed to get quite cold tonight...so we'll see if the fire burns as long...or longer without the grate. This forum sure is helpful for us new guys !
 
Just happened across this page today.. I installed this same Aunt Sarah stove in 1982 and I'm happy to say it's still going strong. The only problem I've had with it was when one of the windows shattered about 10 years ago.

The cheapest quote I got for new windows was about $70 apiece, so I found a piece of 1/4" aluminum (a front panel from an old rack-mounted computer) and cut new panels from it. Our stove is in a basement laundry room, so it didn't make any difference whether the doors were glass or aluminum. The windows were usually too dirty to see through anyway.

Just be sure to oil the blower motor occasionally and replace the door gaskets every few years, and that stove will probably outlast the house!
 
More on the Aunt Sarah Woodstove
View attachment 119470
I aquired a old aunt sarah just like the one pictured The blower on it I believe needs to be replaced, as it does not seem to want to engage every time it is plugged in. I am looking for info on what blower, I would need as I can not see any of the labeling on this one. love the old brochure could you email it to me ? [email protected].. would like to get the ole girl a new damper pc for side the metal coil pc doesn't seem to have any effect. Do you know of a parts source
 
Thanks
I aquired a old aunt sarah just like the one pictured The blower on it I believe needs to be replaced, as it does not seem to want to engage every time it is plugged in. I am looking for info on what blower, I would need as I can not see any of the labeling on this one. love the old brochure could you email it to me ? [email protected].. would like to get the ole girl a new damper pc for side the metal coil pc doesn't seem to have any effect. Do you know of a parts source
 
  • Like
Reactions: oneofakindcritter
I need info on blower as where to oil it, or get parts for it

Look at the fan motor from the RIGHT side of the stove. This is what you should see:
0501141029_zpsd0cead89.jpg


The front hole is kinda hard to see, but it's there. I've been using a few drops of 5W30 every month or two for over 30 years and it still runs just fine!

As far as parts, I doubt that you can get 'OEM' replacement parts for anything on this stove. But anyplace that handles this size motor will probably have something that will work, or they may know where you can get the right motor. The motor will probably have to be specifically designed to withstand the heat from the woodstove.

As for the blower not always engaging, it uses a thermostat switch to turn the motor on & off. I don't know what the temperature limits are, but the motor cycling on & off is normal.
 
Last edited:
  • Like
Reactions: oneofakindcritter
That is a good looking wood stove! I love that corner install with the bricks.
I thought I knew a lot about the wood stoves of the eighties and I owned 4 of them in that decade, but I never heard of the Aunt Sarah. Maybe they never made it down to Georgia.
 
So after 10 years of marriage my loving wife and I bought our first home. Pretty exciting ! I've never owned or used a wood stove but guess what the home came with..ha,ha...So It seems to work ok , although I have no idea what kind it is. I understand the basics so far. It has a blower on the back that pushes the warm air thru 4 big tubes. The tubes actually go thru the fire. On the right side it has a control nob. It has a spring that attaches to a chain and runs the air-in flap thats on the bottom front. No ash pan . Here's a couple pics...maybe somebody can help out this newbie. Thanks!
Def a ( AUNT SARAH ) Have the same one looking for a new blower for ours.
 
My parents just took their old wood burning stove out of their house, and looking to sell it. It is an Aunt Sarah and wondering how much one is worth today? Also, best method for selling.
 
My parents just took their old wood burning stove out of their house, and looking to sell it. It is an Aunt Sarah and wondering how much one is worth today? Also, best method for selling.

I have no idea what they're worth these days.. but I'd guess $250 - $300. I think Craigslist is the best way to sell it.