Help indentify flue pipe?

[Rachelle24]

Does anyone recognize this pellet stove flue pipe? I can’t seem to track down the brand. My new pellet stove connection is about 4” lower than the last one. I’m not sure if I replace a whole section, if they sell a 4” piece or if I should just make a little platform for the stove to elevate it to the right height. Any suggestions? Thank you

 

[rich2500]

best to go with the raised hearth option, new piece of pipe is not gonna help with the height difference

 

[Rachelle24]

Can you explain why? Just so I understand more about this problem? I wondered if the pipe type is no longer available, or expensive, etc. thanks for your help!

 

[rich2500]

Actually if you could post a pic of what you currently have and what your trying to accomplish there may be other options.

 

[Ssyko]

looks like duravent. Raising the hearth is less dificult than cutting the pipe and trying to fab up a 4" piece. unless you have a resistance welder handy.
https://images.homedepot-static.com...ravent-flue-chimney-pipes-3pvl-60-64_1000.jpg

 

[BUBIBEAR]

Can you explain why? Just so I understand more about this problem? I wondered if the pipe type is no longer available, or expensive, etc. thanks for your help!

They make an adjustable pipe section . Most pellet pipe companys have this in stock .

 

[BUBIBEAR]

They make an adjustable pipe section . Most pellet pipe companys have this in stock .

You might want to look this up. DURA -VENT 1FOOT ADJUSTABLE 3 INCH PELLET PIPE . Englander stoves . PT NUMBER AC3012A

 

[Mt Bob]

Looks like the old style duravent,was discontinued a while back,does not mate/seal well with the updated stuff.