Blaze King and customizing

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
I do not have any combustible materials in my setup it's the block wall in the basement with a masonry thimble going through the wall into the fireplace base where they started the clay flues going up. At the first floor the flue is cut on an angle so it can be pushed to the left to make room for the fireplace and the second clay flue stack in the masonry chimney. The first floor fireplace was inspected and the damper removed so a pacific energy insert could be installed. Now that has an insulated 6 inch flue liner. The masonry part there was still in great shape but for code and according to pacific energy and the dealer a liner is needed and and insulated one is recommended if possible. But back to the basement setup I hope I am explaining how the stove is connected to the masonry chimney and how the chimney is constructed with the thimble through the 12 inch block wall. I hope this helps
 
I do not have any combustible materials in my setup it's the block wall in the basement with a masonry thimble going through the wall into the fireplace base where they started the clay flues going up. At the first floor the flue is cut on an angle so it can be pushed to the left to make room for the fireplace and the second clay flue stack in the masonry chimney. The first floor fireplace was inspected and the damper removed so a pacific energy insert could be installed. Now that has an insulated 6 inch flue liner. The masonry part there was still in great shape but for code and according to pacific energy and the dealer a liner is needed and and insulated one is recommended if possible. But back to the basement setup I hope I am explaining how the stove is connected to the masonry chimney and how the chimney is constructed with the thimble through the 12 inch block wall. I hope this helps
So the chimney is no where near combustibles the entire way up till it terminates above the roof?
 
My chimney is on the exterior of the house, it is not an internal or in the house. My house is an all brick house, the base is built on the outside of the basement wall. I'm sure I'm not explaining it correctly. But the only place the chimney touches the house is where the roof and soffit and gutter and chimney meet. So yes there is no combustibles the entire way up.
 
My chimney is on the exterior of the house, it is not an internal or in the house. My house is an all brick house, the base is built on the outside of the basement wall. I'm sure I'm not explaining it correctly. But the only place the chimney touches the house is where the roof and soffit and gutter and chimney meet. So yes there is no combustibles the entire way up.
Doesnt the floor framing and roof framing contact the chimney? Is the wall studded out inside the brick? Do you have the required 1" of clearance in those locations?
 
The floor framing I can not see since the basement is finished. The roof framing does have a space between the finished brick chimney and the roof rafters. I do not know about the wall construction since I didn't see the house built. I do not know what you mean about the wall studded out inside the brick? Are you asking if they built the wall first then layed up the chimney and fireplace face in the wood wall. Or if they boxed it out and used a angle iron as a header and layed up the chimney and face and have a space between the wall sides and chimney?
 
The floor framing I can not see since the basement is finished. The roof framing does have a space between the finished brick chimney and the roof rafters. I do not know about the wall construction since I didn't see the house built. I do not know what you mean about the wall studded out inside the brick? Are you asking if they built the wall first then layed up the chimney and fireplace face in the wood wall. Or if they boxed it out and used a angle iron as a header and layed up the chimney and face and have a space between the wall sides and chimney?
I am just trying to find out if you have the required 1" of clearance between the outer face of the chimney structure to any combustibles. That is what is required to safely use an exterior clay lined chimney.
 
Yes I have the clearance.
 
I tried to have it inspected the best I could to make sure it was safe to use and up to the required code for all parties involved.
 
Ok, so Ive been running the Sequoia all week now since I installed it in the basement on Saturday. It got down to the upper 20's last night and stayed 72 in the house. I really think that adding a BKK on the first floor, or even another Sequoia would be enough to get me through the winters. The heat distribution is great since we have an open floor plan. I would just have to find a way to heat the apartment above the garages and I could do away with the boiler altogether, or keep it as a backup heater. Im using a fraction of the wood compared to what I would if I had the boiler running. There is no visible smoke coming from the chimney so I know the amount of pollution is tremendously cut back. The Sequoia alone is doing a 45 degree delta and I havent really packed it full and run it super hard yet.
 
Ok, so Ive been running the Sequoia all week now since I installed it in the basement on Saturday. It got down to the upper 20's last night and stayed 72 in the house. I really think that adding a BKK on the first floor, or even another Sequoia would be enough to get me through the winters. The heat distribution is great since we have an open floor plan. I would just have to find a way to heat the apartment above the garages and I could do away with the boiler altogether, or keep it as a backup heater. Im using a fraction of the wood compared to what I would if I had the boiler running. There is no visible smoke coming from the chimney so I know the amount of pollution is tremendously cut back. The Sequoia alone is doing a 45 degree delta and I havent really packed it full and run it super hard yet.
Good to hear.
When I went from OWB to the BK my wood consumption is about 1/5th of what I used to burn..
 
I'm glad the sequoia is working out for you. I heat my whole house with the sequoia his time of year as I probably stated earlier. The second stove on the first floor will definitely help when the real cold sets in.