Jetstream Blower Rebuild

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

Jetstream

Member
Oct 29, 2011
8
New Brunswick
Hello all just wondering if anyone out there has had their blower on the jetstream wood boiler apart or can give me advice on dismantling and replacing bearings any help with this would be appreciated thanks
 
Hello all just wondering if anyone out there has had their blower on the jetstream wood boiler apart or can give me advice on dismantling and replacing bearings any help with this would be appreciated thanks
It comes apart in sections . The blades are very fragile and there are no blades made now a days to replace them with .If you can wait about a week I will take one apart and post some pictures of one apart . The two bearings can be had at any automotive parts store .
 
Are they proprietary, or could some model of Dayton blower or fan be retrofitted if needed?
 
It comes apart in sections . The blades are very fragile and there are no blades made now a days to replace them with .If you can wait about a week I will take one apart and post some pictures of one apart . The two bearings can be had at any automotive parts store .
That would be awesome I really appreciate that thanks in advance exactly what I'm looking for! Also I think my motor is on the way out no tag or numbers on it whatsoever any chance you could give me a model number horsepower part number? Thanks really appreciate this!
1581947841337.png
 
Last edited:
That would be awesome I really appreciate that thanks in advance exactly what I'm looking for! Also I think my motor is on the way out no tag or numbers on it whatsoever any chance you could give me a model number horsepower part number? Thanks really appreciate this!View attachment 257171

The motor is 1/2 hp and 3450 rpm . I'm not going to have time to take the blower apart today and take pictures . I get my blowers overhauled at a vacuum cleaner shop .
 
The end cap off with the only nut on this end.

100_2557.JPG


Side veiw.
100_2558.JPG

There is a spacer like this between each of the three blades .
100_2559.JPG

The blades are very fragile and cannot be replaced as the are now all metric in size .
100_2560.JPG