Chimney Pipe Longevity

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

bman42

New Member
Aug 9, 2021
5
Erie,PA
Replacing a Quadrafire woodstove with a Pacific Energy zero clearance.
Have to put new triple wall in from the fireplace to the ceiling/attic, but I have existing triple wall in the attic now.
It's about 14 years old.

My plan was to have the new fireplace and new pipe hooked up to the existing pipe (with compatible/same pipe).

Is there a concern or expected life for the pipe in the attic? I had one installer look at the pipe in the attic and he said the pipe looked good and his plan was to connect to the pipe. Another installer's personal recommendation was to replace ALL the pipe.

Looking for opinions on using the existing pipe or any concerns to hooking to the existing pipe.
Thanks!
 
Replacing a Quadrafire woodstove with a Pacific Energy zero clearance.
Have to put new triple wall in from the fireplace to the ceiling/attic, but I have existing triple wall in the attic now.
It's about 14 years old.

My plan was to have the new fireplace and new pipe hooked up to the existing pipe (with compatible/same pipe).

Is there a concern or expected life for the pipe in the attic? I had one installer look at the pipe in the attic and he said the pipe looked good and his plan was to connect to the pipe. Another installer's personal recommendation was to replace ALL the pipe.

Looking for opinions on using the existing pipe or any concerns to hooking to the existing pipe.
Thanks!
All the pipe needs to be the same make and model and that chimney needs to be specified for the PE zero clearance unit.

If your installer is willing to mix and match chimney components I would be very very concerned.

But prefab chimneys lifespan is typically 25 to 30 years. Unless it was abused
 
Thanks, appreciate it!
the pipe would be same make/model. Installer made it clear it had to all match up.

Thank you!
 
Thanks, appreciate it!
the pipe would be same make/model. Installer made it clear it had to all match up.

Thank you!
Good in that case it is probably fine
 
  • Like
Reactions: bman42
Make sure there is a mating fireplace anchor plate for the chimney pipe that is compatible. This is required for the FP30.
 
  • Like
Reactions: bman42