Pleasant Hearth wood stove

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

tyreese27

New Member
Oct 14, 2021
50
60107
I have a boxwood vogelzang stove right now which heats up my garage where I have it installed and also heats the house with fans blowing the air around. But feel like it burns alot of wood and the seams keep falling apart. So I just ordered and waiting for Pleasant Hearth 1800 Sq ft Wood Burning Stove WSL-1800 do be delivered from the reviews seems like a good stove. My main question if anyone has one how good is it on wood and how long you can get out of it on a night burn when you go to bed?
 
I have a boxwood vogelzang stove right now which heats up my garage where I have it installed and also heats the house with fans blowing the air around. But feel like it burns alot of wood and the seams keep falling apart. So I just ordered and waiting for Pleasant Hearth 1800 Sq ft Wood Burning Stove WSL-1800 do be delivered from the reviews seems like a good stove. My main question if anyone has one how good is it on wood and how long you can get out of it on a night burn when you go to bed?
How tall is your chimney?
 
Um I don't think so. I have no idea what your talking about
Gonna install wood burning stove and gonna do a 90 right off the top of the stove to a two foot pipe going out the wall to a T then have a 30 degree elbow going up 8 feet. Main question is it ok to have a 90 right off the stove. Is the draft gonna be ok to have fire in my stove?
This one you talked about in october
 
I did not do that set up. Found it was easier going straight up through the ceiling and roof.
Ok good. 12' is about the minimum required
 
Do you have a Pleasant Hearth 1800 Sq ft stove?
LOL, ...YES
I am following your thread. I am installing one myself. It's the next size up.
Still waiting for delivery. First thing I'll do is a pre burn out doors to off gas and set the paint. I also will see if it will be practical to make the ash drawer a sealed unit so the floor can be replaced with a cast iron grate. I want a stove that is easy to clean. The small clean out hole in the bottom isn't very useful according to most owners. From what I see in the pics, I can understand why. I will have mine up and heating in about 3 weeks.
 
I have the pleasant hearth 1800 and would not recommend it. I’d say spend a little more and get a better quality stove. I find it hard to control and i don’t get burn times longer than a few hours. Is your chimney 12ft total or 12ft off the roof?
 
  • Like
Reactions: MR. GLO
I have the pleasant hearth 1800 and would not recommend it. I’d say spend a little more and get a better quality stove. I find it hard to control and i don’t get burn times longer than a few hours. Is your chimney 12ft total or 12ft off the roof?
It's Little over 12 feet total. I have a boxwood stove now but was hoping this would be more efficient on burning less wood .