FPX Cat glowing

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

Mooch

Member
Jan 23, 2019
201
Jm
I'm running a cat temp of 700° but none of the cat is glowing at all. Is something wrong with the cat. Only time it glows is when it's flaming good then where the flame gets sucked in is the only glowing spot. I have a fpx apex 42
 
How old is the catalyst? It may be in decline, though a cat does not need to be glowing to be active.
 
It should still be in good shape after a season and a half. Do you see smoke coming out of the chimney top when the cat temp is in the active zone?
 
700 is very low. Can you get your cat to 1100-1300? If not, it has an issue. My FPX has gone through 3 cats. I can only use steelcats at this point. Flame licking destroys the ceramic ones. When you engage the Cat, do the temp numbers climb by 3 -5 degrees? If it drops 50 plus degrees, like mine, it is clogged. Mine clogs every 2 months.
 
Last edited: