First crack at building a stack

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

FireBones

Member
Sep 19, 2012
135
Norfolk County Ontario
Beauty day today..... ;) made the best of a couple hours and made my first official stack. I think I need some practice but I have a lot of that ahead of myself....critique away seasoned veterans haha

F111DC4A-4897-492C-AC10-5B6F60A0D874-2728-000001765043C291.jpg

15894020-03B5-4FA5-84C7-F70DCCDEDA4F-2728-00000176491FC3D1.jpg
 
A thing of beauty ! :)

Looks like you have a bit more that needs stacked.
Hope you get some drier weather .
 
  • Like
Reactions: ScotO and FireBones
You can't beat that, it's standing on its own. Now time to get the rest done.
 
I'd wager a guess that I have about 10-15 more cords to stack up, I was surprised the stacking goes pretty quick and was an enjoyable challenge. Gimme Ohh 10 days and it'll be all licked up :)
 
It's standing, not leaning, up off the ground, and in the open (wind/sun)....looks good to me! ;)
 
  • Like
Reactions: FireBones
Looks real good - nice to see the wood off the ground - looks like you cut small length splits - ~ 12"? Cheers!
 
  • Like
Reactions: FireBones
Looks real good - nice to see the wood off the ground - looks like you cut small length splits - ~ 12"? Cheers!

Yeah got a little wild here and there with the saw haha it's all between 12" & 22" need smaller stuff for the shop and house stoves, and larger for the garn. Once I get a burning season or two under my belt I will likely improve on my cutting lengths, at least I hope. ;)
 
That stack looks OK to me...time will tell.
What kind of wood is that? Pine? If so, you should be able to get it dry by fall even though it is double-row. The only thing I'm double-row on (that I need this year) is some soft Maple. Everything else, even dead standing White Ash, is going to be single-row to let more air get through it.
 
Lookin good. Its harder to stack 12" and 22" together. I try to
keep a few "short stacks" around for the 10 or 12 inchers.
Good job!
 
  • Like
Reactions: FireBones
No offense . . . and maybe it's just me being a bit pessimistic . . . but I wouldn't have a lot of faith in those end stacks.

This could be a bit more stable by going with thinner splits, half splits or rectangles or square splits (although the last two may require hydraulic splitters to create.)

Then again . . . I truly hope I am proved wrong since doing work twice stinks.
 
That stack looks OK to me...time will tell.
What kind of wood is that? Pine? If so, you should be able to get it dry by fall even though it is double-row. The only thing I'm double-row on (that I need this year) is some soft Maple. Everything else, even dead standing White Ash, is going to be single-row to let more air get through it.

Yeah it's pine. Mostly dead standing stuff, thus the fat stack lol.
 
I think you did a pretty damm good job there, FB! Especially for a first attempt. Trust me, as others have stated, we've ALL had a stack or two tumble on us. That's part of the learning process!;)

For stitching the ends (cross stacking) to add rigidity, I start that process when I'm splitting. I try and make a bunch of nice, 'squared off' splits when I'm splitting. I pitch those nice neat splits into their own pile, and use them for the stiched ends......it makes a HUGE difference. Since I started doing that, my ends are nice and square, and MEGA-stable.
 
Beauty day today..... ;) made the best of a couple hours and made my first official stack. I think I need some practice but I have a lot of that ahead of myself....critique away seasoned veterans haha

And just what is there to critique? Looks good to me.

Others have mentioned the ends. Scotty has a good way of preparing his ends and this is how we do it too.

Ends-4.JPG

Then when we move the winter's supply into the barn, we still make the ends the same way.

Winter's heat-1.JPG

As for the strength of the stacking, in 50+ years, we've had exactly one stack tip over.
 
Looks great! You are welcome to come by my house any time that you would like to bone up on your stacking skills.
 
Looks good to me also. But as other noted, different size splits and small splits make it more difficult. IMO

I use a stick and pre measure every piece on the log, but I am OCD.. ;)
 
  • Like
Reactions: FireBones
having done a detailed structural analysis on the aforementioned wood stack our firm has come to the conclusion that a squirrel can easily enter/exit said stack for purposes likely to seem random, and furthermore, snakes will find suitable residential opportunities therein.

we therefore deem this stack 'approved' :)
 
Status
Not open for further replies.