living room outlet relocate

Go for it. As long as the wiring is done to code the location is not important.

Sent from my SM-G900V using Tapatalk

Just consider mudding and finishing that corner. Farther away the better but I know of no rule.

No, you're fine. The code calls for no more than 12' between outlets (no space further than 6' from an outlet) and for an outlet on any piece of usable wall space greater than 2'. Beyond that there's nothing that would apply in terms of the location of that outlet.

Keep in mind that that is current code. Your old house likely never met it and you are most likely not required to update your old home to meet it.

Those laws are at least a few decades old, and anything you touch by law is supposed to meet current code. In this case, the new receptacle should be tamper resistant, and should have protection from an arc-fault circuit interrupter.

If you change an outlet, it's supposed to be replaced with a tamper resistant one. I don't know anyone who does that, unless they're getting an inspection.

burnham said:

If you change an outlet, it's supposed to be replaced with a tamper resistant one. I don't know anyone who does that, unless they're getting an inspection.

Click to expand...

The outlets in my house were almost all worn out when we moved in (the absolute cheapest type available, and probably abused by a house full of cord yankers). I've been slowly replacing them when I have a spare moment here and there.

Once our first born started walking, he gravitated towards the outlets. Toys? A bottle? The dog? Not interesting. I want to stick my fingers in THAT!

So we've been using the safety caps, and removing those every time you vacuum is obnoxious, especially with lack of much to grab and how well the commercial grade outlets I'm using hold onto the prongs.

So now I'm using the tamper resistant versions on most of the remaining outlets. Thankfully, the more expensive ones aren't as hard to get the plug into as the cheap ones, where I fell like I'm going to push the outlet box back into the wall, but they're still definitely harder to insert the plugs and easier to remove them than the type I was using previously.