I have been leaving the stove in stove temp mode at night at around #3. It has been shutting off even though pellets are in hopper. Not sure as to why this is happening. I recently changed to a pine pellet which should not affect this, I don't believe. Anyone have suggestions as to why this may be occurring?
Harmon p-38 shuts off in stove temp mode
- Thread starter Pharmdmd04
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
alternativeheat
Minister of Fire
Earlier this heating season our P61 temp selector had a dirty pot and it would shut down on me. Just touch the dial, not even move the dial but just tap it and the stove would start back up. I got some electronic spray cleaner and sprayed it in there as best as I could get it in and rotated the dial back and forth a few times and it's been fine ever since. That was back in Oct after sitting all summer.. It was just one setting position on the dial that was doing this, which is most common I use in shoulder season.
That said, when is the last time the stove and venting had a full cleaning ? This is about the time of year where those who neglected a mid season cleaning start having trouble, we have had a couple of members chiming in with problems that ended up being plugged vents when all was said and done...
That said, when is the last time the stove and venting had a full cleaning ? This is about the time of year where those who neglected a mid season cleaning start having trouble, we have had a couple of members chiming in with problems that ended up being plugged vents when all was said and done...
Last edited:
Similar threads
