What am I in for?

Great stuff for the winter of 2018 to 2019. Split it small and plan on stacking it in single rows in sunny spot with a top cover that allows air circulation over the top.

The thinner the split the quicker it will season. I allow three years for oak, sometimes it seasons quicker. Most important is airflow. Find a location that gets a lot of wind, top cover if you get a lot of rain but leave the sides open.

If you have an open, airy space to dry your wood and split small, you might be alright for this coming winter. For point of reference, I have one yr old oak split on the small side that measures a bit under 25%. My stack configuration is pictured in my avatar in drying location I would consider "fair". These are double rows up on pallets with a few feet between pallets. Stack left uncovered in our drought here in Connecticut. A better spot in the yard would have dried it a little more. Top covering your oak may help it lose an extra couple of percentage points, which is very noticeable in the stove.
This all said, it is true that 2 to 3 yrs is best for oak, and probably all firewood. That allows you to use bigger splits along with not having to be concerned with moisture content. I have space for about 2 yrs of wood, so it is a bit tough to be way ahead like some are. I have found that things work fine with the super dense woods, as long as you try to wait as long as possible on the and to not use big splits.
Btw, be careful if you are using small splits in the stove, as this can heat up the stove quick. Turning the stove air supply down quicker will help. Would not load stove full of small splits.

By the way even with a single row you should probably switch to alternating the layers 90 degrees with gaps between the logs. The objective is to get as much warm air around each piece of wood as possible.

The alternative is to search the site for info on solar kilns. A greenhouse with good air circulation can really dry wood quick.

Oak and maple are just so heavy and solid. Get it split small. Personally, I think wind and sun are the most important thing. Get those temps up and good things can happen. I have even found apple to dry much quicker than oak.

People have wrapped their stacks in plastic wrap to cook the wood and dry it quicker. I'm going to try it as an experiment this summer.

sportbikerider78 said:

Oak and maple are just so heavy and solid. Get it split small. Personally, I think wind and sun are the most important thing. Get those temps up and good things can happen. I have even found apple to dry much quicker than oak.

People have wrapped their stacks in plastic wrap to cook the wood and dry it quicker. I'm going to try it as an experiment this summer.

Click to expand...

I would think attention to the wood being ventilated would be important with this.

wizards8507 said:

Finished stacking the first cord yesterday, which has been tough to do after work since my stack area is not well-lit. Today we're getting wind gusts up to 60 MPH and the smell coming off the pile is AMAZING.

View attachment 195453

This is what the guy sold me as "one cord." I'm estimating the stack is about 5 x 24 x 1.25, plus a little extra stacked behind the oak tree in the left of the photo.

Click to expand...

A cord is 128 cubic ft. Those dimensions are 150 cubic ft. Looks like you came out ahead for one cord.

Use this site to calculate what you have.

http://www.maine.gov/ag/firewood.html

Ctwoodtick said:

I would think attention to the wood being ventilated would be important with this.

Click to expand...

I've done the shrink wrap thing and it works. Works very well actually.

Babaganoosh said:

I've done the shrink wrap thing and it works. Works very well actually.

Click to expand...

Did you have any mold problems?

kavu said:

Did you have any mold problems?

Click to expand...

It gets small vents. The moisture laden air escapes and the condensation drips down and runs out. In the beginning of the process a lot of water initially comes out. Then it slows down. After the process slowed down I unwrapped it to make sure it got enough wind thru it to dry it out. There's lots of variables you can experiment with.

Babaganoosh said:

It gets small vents. The moisture laden air escapes and the condensation drips down and runs out. In the beginning of the process a lot of water initially comes out. Then it slows down. After the process slowed down I unwrapped it to make sure it got enough wind thru it to dry it out. There's lots of variables you can experiment with.

Click to expand...

Any pics or description of where to put the vents and how many? I may give it a try.