Gas dryer electrical supply question

hey guys. I have done some research and getting mixed feelings. So let me ask here.
I just bought a house. Previous owners left washer and dryer. Dryer has died of course.
I have gas as a hook up. I bought a new dryer ( coming tomorrow supposedly).
The old dryer and washer were plugged into a standard outlet (110/120) with a 15 amp breaker.
The new dryer says it is 120v and requires 15 or 20 amp breaker.
"120 Volt, 60 Hz, AC only, 15- or 20- amp fused electrical supply is required"

However of course I have to buy and hook up the power cord. Here is my lack of knowledge I guess. Since this new Gas dryer says it is 120v and only needs a 15 or 20 amp breaker. Is there any reason I can't use a regular appliance power cord like this. https://www.lowes.com/pd/Utilitech-Appliance-Power-Cord/3166667
instead of a (NEMA Type 10-30R) which I would need an electrician to come hook up.
here is the dryer link with manuals. https://www.lowes.com/pd/Whirlpool-7-cu-ft-Gas-Dryer-White/50382482

if someone could explain what the actual difference is and why or why not I should use a regular 120v outlet cord. I would appreciate any feedback.

A GE gas 120v dryer appears to use a regular power cord. Not sure what the difference is in the whirlpool.

thanks

festerw said:

I would wait before you buy anything, every gas dryer I've ever purchased included the power cord.

Click to expand...

This one does not. Atleast it says it does not.


Sent from my iPhone using Tapatalk

festerw said:

Whirlpool shows it as included.

https://www.whirlpool.com/laundry/dryers/gas/p.WGD7000DW.html

Click to expand...

hmm, I see that. I must have been looking at the electric one that doesn't.

so I doubt it will have the regular 120v power cord. It will probably have the 30 amp power connection. in which I am screwed until I can get someone to run a line..
The installation guide to me is a bit confusing. it reads like I will need to choose a power supply. so idk.. guess I will have to wait until it gets here to make sure before I call someone..
Of course this house has the laundry room and 4 rooms lights on the same breaker which I would like changed anyway. We moved in last week and ran the washing machine and it kept blowing the breaker if I had the living room lights on.

johneh said:

Just asked my son he is an H-VAC mechanic
and does a lot of gas appliance hook up ( in Canada )
he says that all gas dryers use 120 volt standard
20 amp circuit and plugs come installed .

Click to expand...

Man I hope so. My luck is about 1 out of 10. Though and I probably picked the one unit where i need the special outlet 'dryer' outlet. But I can sleep 50% better tonight reading your comment though. Thank you.


Sent from my iPhone using Tapatalk

Seasoned Oak said:

Cant you take the power cord off the old dryer?

Click to expand...

I thought about it. However this is a very old unit and the cord appears to be all through the unit. Also cord might be the original cord which makes me Leary.
I don't even see a model number or anything on this unit to look up to see the make date.

Edit. Found the tag. This dryer is 1985. Says 120v 60hz. Just like the one I am getting. The old unit power cord definitely was factory installed. Gives me some hope.


Sent from my iPhone using Tapatalk

Hogwildz said:

Every electric dryer I ever owned was 240 volts. Not sure about the gas, never had one.

Click to expand...

Came with a 110 outlet plug.


Sent from my iPhone using Tapatalk