Breckwell p4000 help

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
J

JumpJax

New Member
Aug 28, 2017
1
Wisconsin
My pellet stove starts fine. But the blower won't work. I'm not getting any error codes on the control board. It will continue to feed pellets as if nothing is wrong.
When I power down, everything just shuts off. It doesn't cycle through its cool down mode.
I'm assuming the control board is bad. Or could it be something else i'm missing?
 
Maybe the blower motor is bad. the control board would send a signal to the blower motor, but it can't tell if it started or not, so there would be no error code.
 
Sounds like a sensor - snap disc possibly not getting juice to the motor
 
You can check a couple of things- Put power directly to motor to see if its working or check voltage coming to the motor from the control board. Maybe the motor is bound up- needing to be cleaned? Doesn't take much gunk to jam it....
 
You must log in or register to reply here.

Similar threads

S
Breckwell P2000i Pellet Stove Problems - Need Help!
Replies
4
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
spencer.martin
S
P
Breckwell Big E Fan But no Lights
Replies
2
Views
378
The Pellet Mill - Pellet and Multifuel Stoves
zrock
Z
J
Harman p61a won't shut off
Replies
22
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
rickwai
rickwai
I
Help! Restoring a Deeze Freeland Flame stove
Replies
1
Views
208
The Pellet Mill - Pellet and Multifuel Stoves
jjam
J
V
PP130 powers on and then shuts off
Replies
3
Views
303
The Pellet Mill - Pellet and Multifuel Stoves
ARC
ARC
Top Bottom
Back